Proven technology, proven designs –
quality products you can trust.

Mink MM 1104 - 1142 BP

Mink claw compressors have been specially developed to provide reliable compression of air and other gases. Mink claw technology ensures efficient and constant supply of pressure up to 2.0 bar (g) for many industrial applications. 

Clean compressed air

The gas is compressed in a non-contact and totally oil-free process due to the state-of-the-art claw technology. This dry compression means that the gas does not get contaminated and can be used in further processes without being filtered or cleaned.

Application-orientated

The performance of Mink claw compressors can be adapted between 0.7 and 2.0 bar (g) for each particular application through the drive selection. This enables an efficient generation of blast and compressed air.

Minimum maintenance effort

An additional benefit of claw technology is the virtually maintenance-free operation due to the oil-free, non-contact operating principle. The need for maintenance, such as the inspection or replacement of worn parts and operating fluids, is completely eliminated. Mink claw compressors are air-cooled.

The excellent reliability and long life cycle of Mink claw compressors are also a result of the oil-free and non-contacting compression. Volumetric flow and pressure remain consistently high throughout the life cycle of the compressor due to the wear-free operation. An ingenious silencing concept enables quiet operation.






 


Would you like to know more?
Contact us directly (Busch United States):
+1 757 463 7800 Get in contact

Technical Specifications

 Technical specifications
With Mink compressors, two claw-shaped rotors turn in opposite directions inside the housing. Due to the shape of these claw rotors, the air or gas is sucked in, compressed and discharged. The claw rotors do not come into contact neither with each other nor with the cylinder in which they are rotating. Tight clearances between the claw rotors and the housing optimize the internal seal and guarantee a consistently high volume flow. A synchronization gearbox ensures exact synchronization of the claw rotors. A directly flange-mounted asynchronous motor with an efficiency class IE2 / IE3 drives mink compressors. Mink claw compressors are fitted standard with an inlet filter and a pressure relief valve. There are a total of eight different sizes of Mink claw compressors to choose from ranging from 62 to 500 m3/h.

Dimensional Drawing Mink MM 1104 - 1142 BP
Mink MM 1104 - 1142 BP
Volume flow

Air at 70 ºF. Tolerance: ± 10%

60 Hz
Volume flow
Technical data Mink MM 1104 BP Mink MM 1144 BP Mink MM 1102 BP Mink MM 1142 BP
Max. flow 44 SCFM 57 SCFM 79 SCFM 103 SCFM
Weight approx. (without motor) 388 Lbs. 411 Lbs. 436 Lbs. 456 Lbs.
Max. pressure (BP) 13.0 - 31.0 PSIG 13.0 - 31.0 PSIG 13.0 - 31.0 PSIG 13.0 - 31.0 PSIG
Nominal motor rating 2.4 (3.2) - 4.2 (5.6) kW (HP) 3.4 (4.6) - 5.3 (7.1) kW (HP) 6.8 (9.1) - 9.5 (12.7) kW (HP) 9.5 (12.7) - 12.6 (16.9) kW (HP)
Nominal motor speed 1800 RPM 1800 RPM 3600 RPM 3600 RPM
Sound level (ISO 2151) 73 dB(A) 73 dB(A) 81 dB(A) 81 dB(A)*
Dimensions (L x W x H) 42 1/2 x 16 15/16 x 23 1/4 inches 46 7/16 x 16 15/16 x 23 1/4 inches 46 1/4 x 16 15/16 x 23 1/4 inches 4/ 7/16 x 16 15/16 x 23 1/4 inches
Gas outlet 1 ¼" NPT 1 ¼" NPT 1 ¼" NPT 1 ¼" NPT
* complies with accuracy class 2 at operating point of 1.0 bar(g)

Technical Specifications

 Technical specifications
With Mink compressors, two claw-shaped rotors turn in opposite directions inside the housing. Due to the shape of these claw rotors, the air or gas is sucked in, compressed and discharged. The claw rotors do not come into contact neither with each other nor with the cylinder in which they are rotating. Tight clearances between the claw rotors and the housing optimize the internal seal and guarantee a consistently high volume flow. A synchronization gearbox ensures exact synchronization of the claw rotors. A directly flange-mounted asynchronous motor with an efficiency class IE2 / IE3 drives mink compressors. Mink claw compressors are fitted standard with an inlet filter and a pressure relief valve. There are a total of eight different sizes of Mink claw compressors to choose from ranging from 62 to 500 m3/h.

Dimensional Drawing
Mink MM 1104 - 1142 BP
Mink MM 1104 - 1142 BP
Volume flow

Air at 70 ºF. Tolerance: ± 10%

60 Hz
Volume flow
Technical data Mink MM 1104 BP Mink MM 1144 BP Mink MM 1102 BP Mink MM 1142 BP
Max. flow 44 SCFM 57 SCFM 79 SCFM 103 SCFM
Weight approx. (without motor) 388 Lbs. 411 Lbs. 436 Lbs. 456 Lbs.
Max. pressure (BP) 13.0 - 31.0 PSIG 13.0 - 31.0 PSIG 13.0 - 31.0 PSIG 13.0 - 31.0 PSIG
Nominal motor rating 2.4 (3.2) - 4.2 (5.6) kW (HP) 3.4 (4.6) - 5.3 (7.1) kW (HP) 6.8 (9.1) - 9.5 (12.7) kW (HP) 9.5 (12.7) - 12.6 (16.9) kW (HP)
Nominal motor speed 1800 RPM 1800 RPM 3600 RPM 3600 RPM
Sound level (ISO 2151) 73 dB(A) 73 dB(A) 81 dB(A) 81 dB(A)*
Dimensions (L x W x H) 42 1/2 x 16 15/16 x 23 1/4 inches 46 7/16 x 16 15/16 x 23 1/4 inches 46 1/4 x 16 15/16 x 23 1/4 inches 4/ 7/16 x 16 15/16 x 23 1/4 inches
Gas outlet 1 ¼" NPT 1 ¼" NPT 1 ¼" NPT 1 ¼" NPT
* complies with accuracy class 2 at operating point of 1.0 bar(g)

Downloads

Mink MM 1104 - 1142 BP

Busch Vacuum App

Register Your Vacuum Pump – Save Time, Costs and Energy!

Register Busch vacuum pumps and profit from time- and cost-saving features.
 

Vacuum-App.png

Standard News

Latest News