Sprawdzona technologia i konstrukcje  –
wybierz najlepsze rozwiązanie

COBRA BC 0100 / 0200 F Premium Efficiency

  • Advanced Screw Design:
    bell shaped construction, patented self-balancing screws
  • Efficient:
    best-in-class energy footprint, low cost of ownership, minimal maintenance, high uptime
  • Reliable: 
    operationally reliable
  • Flexible:
    application-oriented
  • Quiet:
    noise level < 58 dB(A)
  • Compact Design
     

The COBRA BC 0100/0200 F Premium Efficiency are dry screw vacuum pumps in the proven COBRA BC series. State-of-the-art screw vacuum pump technology featuring a specially developed screw profile sets new standards of efficiency, making these vacuum pumps the ideal solution for tasks in load lock and transfer chambers, as well as in processes such as metrology, lithography, physical vapour deposition (PVD) and rapid thermal annealing (RTA).

The COBRA BC Premium Efficiency series equipped with the latest Busch VacBoost technology meets today’s demand for maximum energy savings and environmental sustainability through 40% lower energy consumption compared to standard vacuum generators. An intelligent stand-by mode, along with a wide range of flexible idle modes, offers additional energy savings potential. High reliability and minimal maintenance further reduce total cost of ownership.

Due to the sophisticated bell shaped cantilever construction, the twin rotor with variable pitch screws is mounted only on the motor side, while the unique “flying bearing” design makes inlet bearings unnecessary. As a result, the pumped medium does not come in contact with the bearings. This ensures clean vacuum generation and allows the full recovery of pumped gases. The direct gas path between inlet and outlet prevents dead spaces and ensures there are no process deposits inside the compression chamber.

The patented self-balancing screw design and screw rotor mounted precisely at the centre of gravity ensure excellent running qualities and guarantee high uptime. A directly mounted canned motor makes the dimensions of the COBRA BC series very compact.

The fully open communication protocol (Modbus TCP-IP) allows control of all functionalities, including idle modes and variable speed drive. It can easily be adapted to a specific network protocol using standard interface components.


COBRA Premium Efficiency– the next level energy saving vacuum pumps.

COBRA Premium Efficiency– the next level energy saving vacuum pumps.

Chcesz uzyskać więcej informacji?
Skontaktuj się z nami bezpośrednio (Busch Polska):
+48 (0)54 231 54 00 Skontaktuj się z nami

Dane techniczne

Technical specifications
Two screw rotors inside the cylinder of the COBRA BC 0100/0200 F Premium Efficiency rotate in opposite directions. The pumped medium is trapped between the cylinder and screw chambers, compressed, and transported to the gas outlet. During the compression process the screw rotors do not come in contact with each other or the cylinder. Thus, no lubricants or operating fluids are required in the compression chamber. The advanced screw design results in lower electrical energy consumption and a lower compressed gas heat load compared to standard screw designs. COBRA BC series vacuum pumps use efficient direct water cooling resulting in an even temperature distribution throughout the pump body, and guaranteeing thermal stability throughout the process.

Rysunku COBRA BC 0100 / 0200 F Premium Efficiency
COBRA BC 0100 / 0200 F Premium Efficiency
Pumping speed

Air at 20 °C. Tolerance: ± 10%

50 Hz 60 Hz
Pumping speed
Dane techniczne COBRA BC 0100 F Premium Efficiency COBRA BC 0200 F Premium Efficiency
Wydajność nominalna 115 m³/h 175 m³/h
Ciśnienie końcowe 0,005 hPa (mbar) 0,005 hPa (mbar)
Nominalna moc silnika 1,8 kW 2,9 kW
Pobór mocy przy ciśnieniu końcowym / trybie bezczynności 0,55 kW 0,7 kW
Nominalne obroty silnika 3600 min-1 4570 min-1
Poziom hałasu (ISO 2151) 58 dB(A) 60 dB(A)
Konsumpcja wody 1,0 l/min 2,0 l/min
Zużycie sprężonego powietrza 25 l/min* 25* l/min
Waga (w przybliżeniu) 120 kg 130 kg
Wymiary (L × W × H) 829 x 304 x 362 mm 806 x 304 x392 mm
Wlot/wylot gazu DN 50 KF DN 50 KF
* Stickstoff kann als Alternative verwendet werden

Dane techniczne

Technical specifications
Two screw rotors inside the cylinder of the COBRA BC 0100/0200 F Premium Efficiency rotate in opposite directions. The pumped medium is trapped between the cylinder and screw chambers, compressed, and transported to the gas outlet. During the compression process the screw rotors do not come in contact with each other or the cylinder. Thus, no lubricants or operating fluids are required in the compression chamber. The advanced screw design results in lower electrical energy consumption and a lower compressed gas heat load compared to standard screw designs. COBRA BC series vacuum pumps use efficient direct water cooling resulting in an even temperature distribution throughout the pump body, and guaranteeing thermal stability throughout the process.

Rysunku
COBRA BC 0100 / 0200 F Premium Efficiency
COBRA BC 0100 / 0200 F Premium Efficiency
Pumping speed

Air at 20 °C. Tolerance: ± 10%

50 Hz
60 Hz
Pumping speed
Dane techniczne COBRA BC 0100 F Premium Efficiency COBRA BC 0200 F Premium Efficiency
Wydajność nominalna 115 m³/h 175 m³/h
Ciśnienie końcowe 0,005 hPa (mbar) 0,005 hPa (mbar)
Nominalna moc silnika 1,8 kW 2,9 kW
Pobór mocy przy ciśnieniu końcowym / trybie bezczynności 0,55 kW 0,7 kW
Nominalne obroty silnika 3600 min-1 4570 min-1
Poziom hałasu (ISO 2151) 58 dB(A) 60 dB(A)
Konsumpcja wody 1,0 l/min 2,0 l/min
Zużycie sprężonego powietrza 25 l/min* 25* l/min
Waga (w przybliżeniu) 120 kg 130 kg
Wymiary (L × W × H) 829 x 304 x 362 mm 806 x 304 x392 mm
Wlot/wylot gazu DN 50 KF DN 50 KF
* Stickstoff kann als Alternative verwendet werden

Pobrane pliki

COBRA BC 0100 / 0200 F Premium Efficiency

  • Instruction manual, COBRA BC 0100 / 0200 F Premium Efficiency english (5,1 MB pdf-Plik danych)

Nie znalazłeś odpowiedniego produktu?

Standard News

Ostatnie aktualności