Tecnologia comprovada,
designs comprovados:
decida a melhor solução

MINK MB 0018 A

  • Latest Claw Technology
  • Robust:
    suitable for mobile applications, resistant to severe vibration, may be used in a wide temperature range
  • Efficient:
    low energy consumption
  • Maintenance-Free:
    dry and contact-free compression
  • Compact:
    small dimensions due to “all-in-one” design
     

The Mink MB 0018 A is a claw pump developed specifically for mobile applications under extreme conditions. It is resistant to severe vibration, and may be operated in temperatures between -40 °C and +40 °C.

The Mink MB 0018 A vacuum pump is a consequence of decades of experience in countless applications, and the result of continuous further development in claw vacuum and overpressure technology by the market leader in dry claw technology.

The contact-free operating principle of claw technology provides the benefit of maintenance- free operation: None of the internal moving parts of the vacuum pump come in contact with each other, so components are not subject to wear. Servicing tasks such as inspection and replacement of worn parts are eliminated completely.

The proven, completely dry claw vacuum technology of Mink claw vacuum pumps allows them to run without operating fluids in the compression chamber. In practice this means no contamination of the pumped medium, and no environmental emissions. In addition, no costs arise for the purchase, replacement and disposal of operating fluids.

Mink claw vacuum pumps are air cooled, so no effort for the installation and maintenance of a cooling system is required. Their contact-free operating principle allows them to run extremely efficiently throughout the vacuum range and to deliver consistently high pumping speeds during their entire life cycle. The outstanding reliability and long service lifetime of Mink claw vacuum pumps are also a result of the contact-free and dry compression.

Optional speed control by CAN or 0–5 V analogic communication allows the pumping speed to be altered dynamically so that Mink MB 0018 A claw vacuum pumps always operate within the most efficient output range. The CAN system permits parameters such as speed, power consumption and temperature to be permanently recorded and controlled.


Mink – efficient and reliable vacuum generation for mobile applications.

Mink – efficient and reliable vacuum generation for mobile applications.

Deseja saber mais?
Entre diretamente em contacto connosco (Busch Portugal):
+351 234 64 80 70 Entre em contacto

Especificações técnicas

Technical specifications
Mink claw vacuum pumps feature two claw-shaped rotors that move in opposite directions, mounted in a housing. The shape of these claw rotors extracts, compresses and expels air or gas. The rotors do not come in contact with each other or the housing, so no lubricants or operating fluids are required in the compression chamber. The minimal clearance between the rotors and the chamber housing optimizes the internal seal and ensures constantly high pumping speeds. An effective air cooling system guarantees optimal operating temperatures. A synchronizing gearbox maintains precise rotor timing. Mink claw vacuum pumps are driven by a brushless direct current motor (12/24 V).

Desenho MINK MB 0018 A
MINK MB 0018 A
Pumping speed

Air at 20 °C. Tolerance: ± 10%

50 Hz 60 Hz
Pumping speed
Características técnicas MB 0018 A
Caudal nominal da bomba 18 m³/h
Pressão final 500 hPa (mbar)
Potência nominal do motor 0,5 kW
Velocidade nominal do motor 6000 min-1
Ambient temperature -40 … +40 °C
Nível sonoro (ISO 2151) 73 dB(A)*
Peso aproximado 6,5 kg
Dimensões (C x L x A) 246 x 120 x 211 mm
Entrada/saída do gás G ¾" ISO
* quando ligado a um sistema

Especificações técnicas

Technical specifications
Mink claw vacuum pumps feature two claw-shaped rotors that move in opposite directions, mounted in a housing. The shape of these claw rotors extracts, compresses and expels air or gas. The rotors do not come in contact with each other or the housing, so no lubricants or operating fluids are required in the compression chamber. The minimal clearance between the rotors and the chamber housing optimizes the internal seal and ensures constantly high pumping speeds. An effective air cooling system guarantees optimal operating temperatures. A synchronizing gearbox maintains precise rotor timing. Mink claw vacuum pumps are driven by a brushless direct current motor (12/24 V).

Desenho
MINK MB 0018 A
MINK MB 0018 A
Pumping speed

Air at 20 °C. Tolerance: ± 10%

50 Hz
60 Hz
Pumping speed
Características técnicas MB 0018 A
Caudal nominal da bomba 18 m³/h
Pressão final 500 hPa (mbar)
Potência nominal do motor 0,5 kW
Velocidade nominal do motor 6000 min-1
Ambient temperature -40 … +40 °C
Nível sonoro (ISO 2151) 73 dB(A)*
Peso aproximado 6,5 kg
Dimensões (C x L x A) 246 x 120 x 211 mm
Entrada/saída do gás G ¾" ISO
* quando ligado a um sistema

Transferências

MINK MB 0018 A

Não encontrou nenhum produto compatível?

Standard News

Notícias por tópicos
  • Peças de plástico para os kits de teste para coronavírus fabricadas com vácuo
    A pandemia do coronavírus continua presente no mundo inteiro e os testes para deteção do coronavírus constituem uma medida importante para salvar vidas e prestar ajuda imediata a pessoas infetadas....
  • Entrega rápida para novos hospitais
    Doze das nossas bombas de vácuo de grandes dimensões foram entregues em Wuhan, na China, para apoiar no tratamento de pacientes infetados com o coronavírus. Foram construídos dois novos hospitais...
  • "Busch Innovation in Vacuum Award" de 2018 atribuído ao fabricante de equipamentos para a produção de xarope de ácer e ao produtor de xarope de ácer
    O "Busch Innovation in Vacuum Award" de 2018 foi atribuído à empresa canadiana Les Équipements Lapierre (Lapierre Equipment Inc.). Ao utilizar as bombas de vácuo de rotores de garra a seco Mink da...
  • Fornecimento de vácuo com um consumo de energia 70 por cento inferior
    Os produtos de antipasti e charcutaria são especialidades da empresa de charcutaria Feinkost Dittmann há mais de cem anos. Nas instalações de produção em Taunusstein, na Alemanha, são vários os...
  • Transporte a vácuo de amêndoas na produção de maçapão
    Maulburg - A Georg Lemke GmbH & Co. KG., uma empresa tradicional com sede em Berlim, produz maçapão desde 1902. Desde as suas modestas origens, esta empresa familiar transformou-se numa operação de...

Standard News

Últimas notícias