Please update your browser.

It looks like you are using an old version of the Microsoft Edge browser. To get the best experience with the Busch website, please update your browser.

Contact
Global

COBRA Semicon

Dry screw vacuum pumps

cobra_bc_1000_f

COBRA Semicon dry screw vacuum pumps are the ideal choice for all demanding processes in the production of photovoltaic cells, flat screens, semiconductors, and in numerous industrial coating applications.

The operating principle of COBRA Semicon is based on our state-of-the-art screw technology. With their patented self-balancing screws, they set new standards in terms of efficiency.

COBRA Semicon combine large throughputs with high vapor and particle tolerance. Particle-laden media can therefore be evacuated without any problems.

The oil- and contact-free operating principle ensures low maintenance requirements, low operating costs and a long life cycle.

The compact dimensions of COBRA Semicon make installation easy – even in confined spaces.

Operating principle

Inside COBRA Semicon dry screw vacuum pumps, two screw rotors rotate in opposite directions. The pumped medium is trapped between the cylinder and the screw chambers. There, it is compressed, and transported to the outlet. During this process, the screw rotors do not come in contact with each other or the cylinder.

Discover our COBRA Semicon series

  • cobra_ba_0100_c
    COBRA BA

    The air-cooled plug&pump solution

    Learn more
  • cobra_bc_1000_f_1
    COBRA BC

    The ideal solution for light to medium semiconductor applications

    Learn more
  • cobra_ds_1200_a
    COBRA DS

    The new generation of dry vacuum pumps for demanding processes

    Learn more

COBRA BC

cobra_bc_0101_g
The ideal solution for light to medium semiconductor applications

  • Advanced screw design
  • Dry and contact-free operating principle
  • Unique “flying bearing” design
  • Cantilever construction
  • Compact fit-in-place design
  • Direct water cooling
  • Fully open communication protocol

Video: How COBRA BC vacuum pumps work

thumbnail_cobra_bc_series

The marketing-cookies have to be accepted to watch this video.

Allow all cookies

Benefits of the COBRA BC series

COBRA BC vacuum pumps are perfectly suited for tasks in load lock and transfer chambers. Further applications are among others metrology, lithography, physical vapor deposition, rapid thermal annealing and silicon etch.

The patented self-balancing screw design ensures lowest vibration levels and quiet operation.

The screws of COBRA BC vacuum pumps are manufactured from a single-piece casting avoiding any gaps. This makes an ingress of process fluids or particles impossible. Thus, corrosion and deposition are prevented.

COBRA BC vacuum pumps feature a bell-shaped cantilever construction: The twin rotor with variable pitch screws is mounted only on the motor side. Thanks to the unique “flying bearing” design, inlet bearings are unnecessary. Therefore, the pumped medium does not come in contact with the bearings. This ensures clean vacuum generation and allows to fully recover the pumped medium.

COBRA BC series vacuum pumps use efficient direct water cooling. An even temperature distribution throughout the pump body is therefore maintained. Moreover, thermal stability during the process is ensured.

The fully open communication protocol (Modbus TCP-IP) allows to control all functionalities. This includes idle modes and variable speed drive. The communication protocol can easily be adapted to a specific network protocol using standard interface components.

A directly mounted, canned motor makes the dimensions of the COBRA BC series very compact. Due to their fit-in-place design, they can be easily and quickly retrofitted to existing systems.

All COBRA BC products

  • COBRA BC 0101 G
    COBRA BC 0101 G

    Nominal pumping speed:
    100 m³/h
    Ultimate pressure:
    0.01 hPa (mbar)

    Learn more
  • COBRA BC 0601–1200 A/G
    COBRA BC 0601–1200 A/G

    Nominal pumping speed:
    Min. 550 m³/h Max. 1200 m³/h
    Ultimate pressure:
    0.003 hPa (mbar)

    Learn more
cobra_bc_thumbnails

The marketing-cookies have to be accepted to watch this video.

Allow all cookies

COBRA BA

cobra_ba_0100_c
The air-cooled plug&pump solution

  • Advanced screw design
  • Dry and contact-free operating principle
  • Unique “flying bearing” design
  • Cantilever construction
  • Compact design
  • Effective air cooling
  • Optional frequency converter

Benefits of the COBRA BA series

COBRA BA are proven dry screw vacuum pumps perfectly suited for demanding processes such as sterilization, metallurgy, gas recovery or furnace applications.

The patented self-balancing screw design ensures lowest vibration levels and quiet operation.

COBRA BA vacuum pumps feature a bell-shaped cantilever construction: The twin rotor with variable pitch screws is mounted only on the motor side. Thanks to the unique “flying bearing” design, inlet bearings are unnecessary. Therefore, the pumped medium does not come in contact with the bearings. This ensures clean vacuum generation and allows to fully recover the pumped medium.

COBRA BA vacuum pumps are characterized by an efficient air cooling.

A directly mounted, canned motor makes the dimensions of the COBRA BA series very compact.

All COBRA BA products

  • COBRA BA 0100 C
    COBRA BA 0100 C

    Nominal pumping speed:
    Min. 85 m³/h Max. 105 m³/h
    Ultimate pressure:
    0.01 hPa (mbar)

    Learn more

COBRA DS

cobra_ds_1200_a
The new generation of dry vacuum pumps for demanding processes

  • Advanced screw design
  • Dry and contact-free operating principle
  • Excellent powder handling
  • Effective indirect water cooling
  • Compact fit-in-place design
  • High pumping speed for the discharge of hydrogen
  • High-efficiency motor
  • Sizes with integrated vacuum booster available

Benefits of the COBRA DS series

COBRA DS dry screw vacuum pumps are the ideal vacuum generators for demanding processes. Even under conditions in which a high hydrogen throughput is required. They are therefore perfectly suited for chemical vapor deposition, rapid thermal processing or atomic layer deposition.

Various sizes of the COBRA DS series feature an integrated high-performance vacuum booster. This combination of backing pump and vacuum booster allows to achieve increased pumping speeds and ultimate pressures.

The patented self-balancing screw design ensures excellent powder handling and high uptime.

The screws of COBRA DS vacuum pumps are manufactured from a single-piece casting avoiding any gaps. This makes an ingress of process fluids or particles impossible. Thus, corrosion and deposition are prevented.

COBRA DS series vacuum pumps use effective, indirect water cooling. As a result, the temperature distribution throughout the pump body can be controlled. A response to process variations is possible at any time.

Due to their fit-in-place design, COBRA DS can be easily and quickly retrofitted to existing systems.

All COBRA DS products

  • COBRA DS 0080/0160 G
    COBRA DS 0080/0160 G

    Nominal pumping speed:
    Min. 70 m³/h Max. 160 m³/h
    Ultimate pressure:
    0.03 hPa (mbar)

    Learn more
  • COBRA DS 0600 E
    COBRA DS 0600 E

    Nominal pumping speed:
    600 m³/h
    Ultimate pressure:
    0.01 hPa (mbar)

    Learn more
  • COBRA DS 0700–2000 G
    COBRA DS 0700–2000 G

    Nominal pumping speed:
    Min. 500 m³/h Max. 1640 m³/h
    Ultimate pressure:
    0.003 hPa (mbar)

    Learn more
  • COBRA DS 1200/1800 A/A X
    COBRA DS 1200/1800 A/A X

    Nominal pumping speed:
    Min. 1200 m³/h Max. 1700 m³/h
    Ultimate pressure:
    0.003 hPa (mbar)

    Learn more
  • COBRA DS 2141 A
    COBRA DS 2141 A

    Nominal pumping speed:
    1875 m³/h
    Ultimate pressure:
    0.003 hPa (mbar)

    Learn more
  • COBRA DS 3010/3161 C/G
    COBRA DS 3010/3161 C/G

    Nominal pumping speed:
    3200 m³/h
    Ultimate pressure:
    0.001 hPa (mbar)

    Learn more
  • COBRA DS 3181 C
    COBRA DS 3181 C

    Nominal pumping speed:
    3500 m³/h
    Ultimate pressure:
    0.001 hPa (mbar)

    Learn more
  • COBRA DS 5161–9161 B/F
    COBRA DS 5161–9161 B/F

    Nominal pumping speed:
    Min. 4300 m³/h Max. 6160 m³/h
    Ultimate pressure:
    0.001 hPa (mbar)

    Learn more
  • COBRA DS 8162/8163 B/F
    COBRA DS 8162/8163 B/F

    Nominal pumping speed:
    Min. 7000 m³/h Max. 7385 m³/h
    Ultimate pressure:
    0.001 hPa (mbar)

    Learn more