Please update your browser.

It looks like you are using an old version of the Microsoft Edge browser. To get the best experience with the Busch website, please update your browser.

Contact
Hungary
  • EN
pizza

ArxOnt - iStock.com.

Energy-Efficient Packaging of Pizza Toppings

Danish Crown Toppings

Pepperoni for topping pizzas is the core product of Danish Crown Toppings. A total of 15.000 tons of this spicy pizza topping are produced every year. That's enough to top 300 million pizzas. The pepperoni is packed on a total of seven packaging lines with tray sealers or thermoforming machines. The required vacuum is supplied extremely efficiently by a centralized vacuum supply from Busch Vacuum Solutions.

About Danish Crown Toppings

DK-Foods A/S, which was founded in 2003, became Danish Crown Toppings in 2017. Danish Crown Toppings is part of the Danish Crown Food division of the Danish Crown Group. Various types of pepperoni are produced, which are used as slices, cubes or sticks exclusively as toppings for pizzas. They are therefore pure B2B products supplied to manufacturers of frozen pizzas and fast food chains worldwide.

Production takes place at the Danish site in Kjellerup with 110 employees in two-shift operation. The products are packed on a total of seven packaging lines with tray sealers or thermoforming machines in packaging sizes from one to 15 kilograms. All packaging machines were equipped with R5 rotary vane vacuum pumps from Busch as standard, while a second R5 rotary vane vacuum pump was added to the thermoforming machines in order to form the bottom film. At the beginning of 2017, Technical Manager Birger Brødløs had already started to think about how he could make the vacuum supply of the then five packaging machines more efficient.
His aim was to prevent heat radiating from the vacuum pumps into the production rooms. At that time, nine vacuum pumps were operated for 16 hours a day on five packaging lines with a total installed capacity of 28 kilowatts. The temperature in the production rooms is permanently kept at 14°C. The heat radiation from the vacuum pumps required an increased amount of energy from the air-conditioning system in order to prevent the temperature in the production rooms from rising.

Busch centralized vacuum solution

Birger Brødløs contacted the vacuum experts at Busch. They recommended he used a centralized vacuum supply that would be installed outside the production area. They said that this would completely eliminate noise and heat emissions in the production area. The project planning for the new centralized vacuum supply was carried out in such a way that the existing R5 vacuum pumps could be used in the new vacuum system and investment costs could thus be saved. The vacuum system was installed in a front building directly at the production building. In terms of technology, the vacuum system has a modular design and supplies the individual packaging machines with different vacuum levels via three ring lines.

Four R5 rotary vane vacuum pumps (Fig. 1, Fig. 2) are connected to a vacuum vessel, which they permanently evacuate to 50 millibar. This "rough vacuum" prevails in the complete ring line up to the valve in the packaging machine. The vacuum vessel serves as a vacuum buffer. This ensures that sufficient pumping speed is maintained if, for example, all vacuum chambers require vacuum at the same time for extracting air. If 50 millibars are reached in the vacuum chambers, the process is switched over to the second ring line via valves. This ring line is connected to two additional R5 rotary vane vacuum pumps in the vacuum system, which generate a "medium vacuum" of 15 millibar.
The packaging chambers are evacuated in two steps. This is technically the most efficient way to realize very fast pump-down times.
Two MINK claw vacuum pumps (Fig. 3) from Busch are also part of the vacuum system. These MINK claw vacuum pumps operate independently of the other vacuum generators. They generate a vacuum of 200 mbar and are connected to a handling system for packed pepperoni. They are operated by two intelligent frequency drives. The communication by their own BUS connection allows to match the capacity of the vacuum pumps to the actual needs exactly. MINK claw vacuum pumps operate contact-free. This means that they do not require any operating materials or wearing parts, which makes them virtually maintenance-free (Fig. 4).
Further advantages emerged following start-up of the vacuum system in 2017. The main advantage is that by centralizing the vacuum supply and installing it outside the cooled production rooms, it was possible to reduce the cooling capacity in the building. The bottom line was an annual saving in energy costs of 147,000 kilowatt hours. Due to the high energy savings, the investment in the centralized vacuum supply was subsidized by the state and Danish Crown Toppings received an "energy bonus" in the first year after start-up.

The vacuum system is controlled by a control system from Busch. It enables the adapting of the pumping speed directly to the actual demand from the packaging machines in operation. This means that individual vacuum pumps are switched on or off in line with actual demand. In daily practice, this means that the operating time of each individual vacuum pump is shorter and not, as was previously the case when the vacuum pumps were installed directly on or in the packaging machine, during two shifts. This facilitates further energy savings or results in power reserves. Birger Brødløs used this and in the meantime connected two more new packaging lines to the vacuum system, which was originally designed for five packaging lines.

After several years of operation, Birger Brødløs is confident that he made the right decision by centralizing the vacuum supply in order to pack the pepperoni for the global market extremely efficiently and reliably.