Una tecnología y unos diseños probados –
elija la mejor solución

MINK MB 0018 A

  • Latest Claw Technology
  • Robust:
    suitable for mobile applications, resistant to severe vibration, may be used in a wide temperature range
  • Efficient:
    low energy consumption
  • Maintenance-Free:
    dry and contact-free compression
  • Compact:
    small dimensions due to “all-in-one” design
     

The Mink MB 0018 A is a claw pump developed specifically for mobile applications under extreme conditions. It is resistant to severe vibration, and may be operated in temperatures between -40 °C and +40 °C.

The Mink MB 0018 A vacuum pump is a consequence of decades of experience in countless applications, and the result of continuous further development in claw vacuum and overpressure technology by the market leader in dry claw technology.

The contact-free operating principle of claw technology provides the benefit of maintenance- free operation: None of the internal moving parts of the vacuum pump come in contact with each other, so components are not subject to wear. Servicing tasks such as inspection and replacement of worn parts are eliminated completely.

The proven, completely dry claw vacuum technology of Mink claw vacuum pumps allows them to run without operating fluids in the compression chamber. In practice this means no contamination of the pumped medium, and no environmental emissions. In addition, no costs arise for the purchase, replacement and disposal of operating fluids.

Mink claw vacuum pumps are air cooled, so no effort for the installation and maintenance of a cooling system is required. Their contact-free operating principle allows them to run extremely efficiently throughout the vacuum range and to deliver consistently high pumping speeds during their entire life cycle. The outstanding reliability and long service lifetime of Mink claw vacuum pumps are also a result of the contact-free and dry compression.

Optional speed control by CAN or 0–5 V analogic communication allows the pumping speed to be altered dynamically so that Mink MB 0018 A claw vacuum pumps always operate within the most efficient output range. The CAN system permits parameters such as speed, power consumption and temperature to be permanently recorded and controlled.


Mink – efficient and reliable vacuum generation for mobile applications.

Mink – efficient and reliable vacuum generation for mobile applications.

¿Quiere saber más?
Póngase en contacto
con nosotros directamente (Busch Estados Unidos):
1-800-USA-PUMP Formulario de contacto

Especificaciones técnicas

Technical specifications
Mink claw vacuum pumps feature two claw-shaped rotors that move in opposite directions, mounted in a housing. The shape of these claw rotors extracts, compresses and expels air or gas. The rotors do not come in contact with each other or the housing, so no lubricants or operating fluids are required in the compression chamber. The minimal clearance between the rotors and the chamber housing optimizes the internal seal and ensures constantly high pumping speeds. An effective air cooling system guarantees optimal operating temperatures. A synchronizing gearbox maintains precise rotor timing. Mink claw vacuum pumps are driven by a brushless direct current motor (12/24 V).

Dibujo MINK MB 0018 A
MINK MB 0018 A
Pumping speed

Air at 20 °C. Tolerance: ± 10%

50 Hz 60 Hz
Pumping speed
Características técnicas MB 0018 A
Caudal nominal 18 m³/h
Vacío límite 500 hPa (mbar)
Potencia nominal del motor 0,5 kW
Velocidad nominal del motor 6000 min-1
Ambient temperature -40 … +40 °C
Nivel sonoro (ISO 2151) 73 dB(A)*
Peso aproximado 6,5 kg
Dimensiones (L × W × H) 246 x 120 x 211 mm
Entrada / Escape de gases G ¾" ISO
* conectado a un sistema

Especificaciones técnicas

Technical specifications
Mink claw vacuum pumps feature two claw-shaped rotors that move in opposite directions, mounted in a housing. The shape of these claw rotors extracts, compresses and expels air or gas. The rotors do not come in contact with each other or the housing, so no lubricants or operating fluids are required in the compression chamber. The minimal clearance between the rotors and the chamber housing optimizes the internal seal and ensures constantly high pumping speeds. An effective air cooling system guarantees optimal operating temperatures. A synchronizing gearbox maintains precise rotor timing. Mink claw vacuum pumps are driven by a brushless direct current motor (12/24 V).

Dibujo
MINK MB 0018 A
MINK MB 0018 A
Pumping speed

Air at 20 °C. Tolerance: ± 10%

50 Hz
60 Hz
Pumping speed
Características técnicas MB 0018 A
Caudal nominal 18 m³/h
Vacío límite 500 hPa (mbar)
Potencia nominal del motor 0,5 kW
Velocidad nominal del motor 6000 min-1
Ambient temperature -40 … +40 °C
Nivel sonoro (ISO 2151) 73 dB(A)*
Peso aproximado 6,5 kg
Dimensiones (L × W × H) 246 x 120 x 211 mm
Entrada / Escape de gases G ¾" ISO
* conectado a un sistema

Descargas

MINK MB 0018 A

Nos has encontrado el producto adequado ?

Standard News

Tema de noticias
  • Energy-Efficient Packaging of Pizza Toppings
    Pepperoni for topping pizzas is the core product of Danish Crown Toppings. A total of 15.0000 tons of this spicy pizza topping are produced every year. That's enough to top 300 million pizzas. The...
  • Enormous energy savings thanks to the right choice of vacuum generation
    The Danish company Tvilum is one of the largest manufacturers of flat pack furniture for self-assembly and sells eight million pieces of furniture a year all over the world through various...
  • Improving Separation Efficiency of Sand Traps with Claw Compressors
    As the first treatment step in wastewater treatment facilities, aerated sand traps are an important process step for optimum and economical wastewater treatment. Separating out sand and other...
  • Tecnología de vacío de última generación para desgasificación del plástico durante la extrusión
    La empresa PolyComp GmbH, especializada en compuestos plásticos, es fabricante de todo tipo de plásticos. Su gama de productos va desde los plásticos de alta temperatura y termoplásticos de...
  • Efficient vacuum supply for motor home production
    The company Dethleffs GmbH & Co. KG produces a wide range of caravans and motor homes in a variety of sizes and designs for customers all over the world. Based in Isny in the Allgäu in Germany,...

Standard News

Últimas noticias