Tehnologie dovedită, design dovedit –
alegeți soluția cea mai bună

COBRA DS 8162 / 8163 A/E

  • Advanced Screw Design
  • Efficient:
    low operating costs, minimal maintenance, high uptime
  • Flexible:
    application-oriented
  • Short Process Times:
    due to high pumping speeds
  • Compact Design
     

COBRA DS 8162/8163 A/E are dry screw vacuum pumps in the proven COBRA DS series. Their high pumping speeds, even under conditions in which a high hydrogen throughput is required, make COBRA DS screw vacuum pumps ideal for all demanding processes in the production of photovoltaic cells, flat panels and semiconductors. State-of- the-art COBRA DS screw vacuum technology allows powder- and particle-laden media to be evacuated.

COBRA DS screw vacuum pumps feature dry compression, a specially developed screw profile, and unimpeded gas discharge. The result is a high degree of vapour and particle tolerance. The screws are manufactured from a single-piece casting avoiding any gaps, making the ingress of process fluids or particles impossible, and thereby preventing corrosion. The COBRA DS 8162/8163 A/E feature an integrated vacuum booster as standard, providing higher pumping speeds and ultimate pressures. The backing pump and vacuum booster are combined on a compact base frame.

Equipped with high-efficiency motors, the COBRA DS 8162/8163 A/E offer excellent energy efficiency. With low maintenance requirements, low operating costs, a very high uptime and a long life cycle, the total cost-of-ownership is very low, setting the standard in this performance class.

Retrofitting these screw vacuum pumps to existing systems can be performed quickly and easily due to a fit-in-place design.

Applications

  • High-capacity load lock
  • Coater process (PGMEA solvent process)

COBRA – the new generation of dry vacuum pumps for demanding processes.

COBRA – the new generation of dry vacuum pumps for demanding processes.

Vreți să aflați mai multe?
Contactați-ne direct (Busch România):
+40 770 709 709 Intra în contact

Specificaţii tehnice

Technical specifications
COBRA DS 8162/8163 A/E are screw vacuum pumps combined with one vacuum booster. Two screw rotors inside the cylinder of the screw vacuum pump rotate in opposite directions. The pumped medium is trapped between the cylinder and screw chambers, compressed, and transported to the gas outlet. During the compression process the screw rotors do not come into contact with each other or the cylinder. Thus, no lubricants or operating fluids are required in the compression chamber. COBRA DS series vacuum pumps use efficient, indirect water cooling resulting in a controllable temperature distribution throughout the pump body, and allowing to respond to process variations. The advanced screw design allows an extremely high pumping speed for the discharge of hydrogen. The COBRA DS 8162/8163 A/E use high performance vacuum boosters to optimize the system performance.

Desen COBRA DS 8162 D
COBRA DS 8162 D
Pumping speed

Air at 20 °C. Tolerance: ± 10%

50 Hz 60 Hz
Pumping speed
Technical data COBRA DS 8162 E COBRA DS 8163 A
Viteză nominală de pompare 7000 m³/h 7385 m³/h
Presiune finală 0,001 (1·10-3) hPa (mbar) 0,001 (1·10-3) hPa (mbar)
Nominal motor rating vacuum booster 20 kW 20 kW
Nominal motor rating backing pump 2 · 15 kW 3 · 15 kW
Nominal motor speed backing pump 3600 min-1 3600 min-1
Nominal motor speed vacuum booster 3600 min-1 3600 min-1
Power consumption at ultimate pressure / Idle mode 21 / 19 kW 30 kW
Nivel de zgomot (ISO 2151) <78 dB(A) <78 dB(A)
Consum de apă 22 l/min 31 l/min
Nitrogen consumption 2 · (0 - 200) l/min 3 · (0 - 200) l/min
Greutate aprox. 2500 kg 3320 kg
Dimensiuni (L x W x H) 1604 x 1470 x 1860 mm 1604 x 2114 x 1860 mm
Admisie/evacuare gaz DN 200 / 2 · DN 63 DN 200 / 3 · DN 63

Specificaţii tehnice

Technical specifications
COBRA DS 8162/8163 A/E are screw vacuum pumps combined with one vacuum booster. Two screw rotors inside the cylinder of the screw vacuum pump rotate in opposite directions. The pumped medium is trapped between the cylinder and screw chambers, compressed, and transported to the gas outlet. During the compression process the screw rotors do not come into contact with each other or the cylinder. Thus, no lubricants or operating fluids are required in the compression chamber. COBRA DS series vacuum pumps use efficient, indirect water cooling resulting in a controllable temperature distribution throughout the pump body, and allowing to respond to process variations. The advanced screw design allows an extremely high pumping speed for the discharge of hydrogen. The COBRA DS 8162/8163 A/E use high performance vacuum boosters to optimize the system performance.

Desen
COBRA DS 8162 D
COBRA DS 8162 D
Pumping speed

Air at 20 °C. Tolerance: ± 10%

50 Hz
60 Hz
Pumping speed
Technical data COBRA DS 8162 E COBRA DS 8163 A
Viteză nominală de pompare 7000 m³/h 7385 m³/h
Presiune finală 0,001 (1·10-3) hPa (mbar) 0,001 (1·10-3) hPa (mbar)
Nominal motor rating vacuum booster 20 kW 20 kW
Nominal motor rating backing pump 2 · 15 kW 3 · 15 kW
Nominal motor speed backing pump 3600 min-1 3600 min-1
Nominal motor speed vacuum booster 3600 min-1 3600 min-1
Power consumption at ultimate pressure / Idle mode 21 / 19 kW 30 kW
Nivel de zgomot (ISO 2151) <78 dB(A) <78 dB(A)
Consum de apă 22 l/min 31 l/min
Nitrogen consumption 2 · (0 - 200) l/min 3 · (0 - 200) l/min
Greutate aprox. 2500 kg 3320 kg
Dimensiuni (L x W x H) 1604 x 1470 x 1860 mm 1604 x 2114 x 1860 mm
Admisie/evacuare gaz DN 200 / 2 · DN 63 DN 200 / 3 · DN 63

Descărcări

COBRA DS 8162 / 8163 A/E

Nu ați găsit un produs potrivit?

Standard News

Latest News