Tehnologie dovedită, design dovedit –
alegeți soluția cea mai bună

COBRA BC 0100 / 0200 F

  • Advanced Screw Design:
    bell shaped construction, patented self-balancing screws
  • Efficient:
    low operating costs, energy-efficient, minimal maintenance, high uptime
  • Reliable:
    operationally reliable
  • Flexible:
    application-oriented
  • Quiet:
    noise level < 58 dB(A)
  • Compact Design


The COBRA BC 0100/0200 F are dry screw vacuum pumps in the proven COBRA BC series. State-of-the-art screw vacuum pump technology featuring a specially developed screw profile sets new standards of efficiency, making these vacuum pumps the ideal solution for tasks in load lock and transfer chambers, as well as in processes such as metrology, lithography, physical vapour deposition (PVD) and rapid thermal annealing (RTA).

Due to the sophisticated bell shaped cantilever construction, the twin rotor with variable pitch screws is mounted only on the motor side, while the unique “flying bearing” design makes inlet bearings unnecessary. As a result, the pumped medium does not come in contact with the bearings. This ensures clean vacuum generation and allows the full recovery of pumped gases. The direct gas path between inlet and outlet prevents dead spaces and ensures there are no process deposits inside the compression chamber.

The patented self-balancing screw design and screw rotor mounted precisely at the centre of gravity ensure excellent running qualities and guarantee high uptime. A directly mounted canned motor makes the dimensions of the COBRA BC series very compact.

Equipped with high-efficiency motors and idle mode capabilities, the COBRA BC 0100/0200 F offer excellent energy efficiency. With low maintenance requirements, low operating costs, a very high uptime and a long life cycle, the total cost of ownership is very low.

Retrofitting these screw vacuum pumps to existing systems can be performed quickly and easily due to a fit-in-place design.

The fully open communication protocol (Modbus TCP-IP) allows control of all functionalities, including idle modes and variable speed drive. It can easily be adapted to a specific network protocol using standard interface components.


COBRA BC – the next level of light to medium duty vacuum pumps.

COBRA BC – the next level of light to medium duty vacuum pumps.

Vreți să aflați mai multe?
Contactați-ne direct (Busch România):
+40 770 709 709 Intra în contact

Specificaţii tehnice

Technical specifications
Two screw rotors inside the cylinder of the COBRA BC 0100/0200 F rotate in opposite directions. The pumped medium is trapped between the cylinder and screw chambers, compressed, and transported to the gas outlet. During the compression process the screw rotors do not come in contact with each other or the cylinder. Thus, no lubricants or operating fluids are required in the compression chamber. The advanced screw design results in lower electrical energy consumption and a lower compressed gas heat load compared to standard screw designs. COBRA BC series vacuum pumps use efficient direct water cooling resulting in an even temperature distribution throughout the pump body, and guaranteeing thermal stability throughout the process.

Desen COBRA BC 0100 / 0200 F
COBRA BC 0100 / 0200 F
Pumping speed

Air at 20 °C. Tolerance: ± 10%

50 Hz 60 Hz
Pumping speed
Technical data COBRA BC 0100 F COBRA BC 0200 F
Viteză nominală de pompare 100 m³/h 165 m³/h
Presiune finală 0,01 hPa (mbar) 0,01 hPa (mbar)
Putere nominală a motorului 1,5 kW 2,9 kW
Viteză nominală a motorului 3600 min-1 4570 min-1
Consum de energie la presiune finală 1,3 kW 1,6 kW
Nivel de zgomot (ISO 2151) 58 dB(A) 60 dB(A)
Consum de apă 1,0 l/min 2,0 l/min
Nitrogen consumption 0 - 50 l/min 0 - 50 l/min
Greutate aprox. 120 kg 130 kg
Dimensiuni (L x W x H) 829 x 304 x 362 mm 806 x 304 x 392 mm
Admisie/evacuare gaz DN 50 KF / DN 40 KF DN 50 KF / DN 40 KF

Specificaţii tehnice

Technical specifications
Two screw rotors inside the cylinder of the COBRA BC 0100/0200 F rotate in opposite directions. The pumped medium is trapped between the cylinder and screw chambers, compressed, and transported to the gas outlet. During the compression process the screw rotors do not come in contact with each other or the cylinder. Thus, no lubricants or operating fluids are required in the compression chamber. The advanced screw design results in lower electrical energy consumption and a lower compressed gas heat load compared to standard screw designs. COBRA BC series vacuum pumps use efficient direct water cooling resulting in an even temperature distribution throughout the pump body, and guaranteeing thermal stability throughout the process.

Desen
COBRA BC 0100 / 0200 F
COBRA BC 0100 / 0200 F
Pumping speed

Air at 20 °C. Tolerance: ± 10%

50 Hz
60 Hz
Pumping speed
Technical data COBRA BC 0100 F COBRA BC 0200 F
Viteză nominală de pompare 100 m³/h 165 m³/h
Presiune finală 0,01 hPa (mbar) 0,01 hPa (mbar)
Putere nominală a motorului 1,5 kW 2,9 kW
Viteză nominală a motorului 3600 min-1 4570 min-1
Consum de energie la presiune finală 1,3 kW 1,6 kW
Nivel de zgomot (ISO 2151) 58 dB(A) 60 dB(A)
Consum de apă 1,0 l/min 2,0 l/min
Nitrogen consumption 0 - 50 l/min 0 - 50 l/min
Greutate aprox. 120 kg 130 kg
Dimensiuni (L x W x H) 829 x 304 x 362 mm 806 x 304 x 392 mm
Admisie/evacuare gaz DN 50 KF / DN 40 KF DN 50 KF / DN 40 KF

Descărcări

COBRA BC 0100 / 0200 F

Nu ați găsit un produs potrivit?

Standard News

Latest News