BUSCH GENUINE OILS AND LUBRICANTS
Rely on Busch genuine oils and lubricants for your vacuum pumps, blowers and compressors.
Oil is essential. For vacuum generation in oil-lubricated rotary vane vacuum pumps. The role of oil is twofold: A smooth rotation cycle, allowing the vanes to slide out freely. And an efficient sealing of the compression chamber.
However, during operation, the vacuum pump oil is exposed to various sources of contamination. So that it loses its viscosity over time. Together with all its beneficial characteristics.
Running a vacuum pump with degraded inferior oil will reduce its performance and shorten its lifecycle. A regular oil change and the use of high-quality oils ensure your vacuum pump is performing at its optimum and continues to meet your process requirements.
A sophisticated and perfectly balanced formula is therefore the secret to maintaining the initial viscosity and lubrication properties for as long as possible. Even dry vacuum pumps, blowers and compressors do need oil for their gear boxes in order to prevent premature wear and to ensure smooth operation with low noise and vibration levels.
There are many lubricants. But only Busch original lubricants ensure the ideal match for your Busch vacuum pump, blower or compressor. And your application.
WHY BUSCH GENUINE VACUUM PUMP OILS?
Get the best performance
Busch genuine oils and lubricants are the result of decades of experience. In all areas of vacuum generation. They have been specially developed to achieve the optimum performance in terms of cycle times and ultimate pressure. No matter what vacuum pump, blower and compressor you are using.
Extend the lifetime of your vacuum pump
Only Busch genuine oils and lubricants ensure a very high uptime. With stable performance over time. We have tested them under the harshest conditions. With thousands of customers. Good lubricity reduces friction, increases the efficiency and allows for extended change intervals.
Avoid risk of “equivalent” oils
Vacuum pump oils that are advertised as "equivalent" to Busch genuine oils and lubricants often do not deliver the desired performance. There is no guarantee that quality or performance tests have been conducted according to Busch standards. Do not take any risk. Order your replacement oils directly from Busch.
Synthetic Food-Grade Oils for Food Applications
Optimum performance. For the food industry.Strict hygiene and safety regulations apply to the food industry, such as EC Directive 93/43 EEC and the FDA 21 CFR / HACCP concept. All synthetic food-grade oils from Busch are H1-certified, the highest standard for oils with occasional direct food contact.
Synthetic Oils and Lubricants
Optimum performance. For demanding processes.Synthetic oils and lubricants are suitable for demanding applications with increased process loads (e.g. acids, chemicals) and higher operating temperatures. Due to their higher resistance, they have an up to four times longer service life than conventional mineral oils, depending on the application.
Special PFPE Lubricants
Chemically inert. For demanding applications.If extreme heat, aggressive chemicals, solvents, reactive gases or similar cause problems in your process, Busch PFPE lubricants are the solution for you. Especially in oxygen-rich applications, with an oxygen content of more than 21%, or with corrosive chemicals. Our PFPE lubricants are completely inert and have a long service life. Even under extreme operating conditions. In case of contamination, these lubricants can be professionally filtered or reprocessed. This means they can be reused several times before a new filling is required.
- dry and clean storage space
- ambient temperature between 0 and 40 °C
- air humidity < 70 % r.h., avoid moisture condensation on container
- no direct sunlight (especially important for plastic containers)
- keep container hermetically sealed
- prevent foreign matter from entering the container