Proven technology, proven designs –
quality products you can trust.

COBRA BC 0100 / 0200 F Premium Efficiency

  • Advanced Screw Design:
    bell shaped construction, patented self-balancing screws
  • Efficient:
    best-in-class energy footprint, low cost of ownership, minimal maintenance, high uptime
  • Reliable: 
    operationally reliable
  • Flexible:
  • Quiet:
    noise level < 58 dB(A)
  • Compact Design

The COBRA BC 0100 F Premium Efficiency is a dry screw vacuum pump in the proven COBRA BC series. State-of-the-art screw vacuum pump technology featuring a specially developed screw profile sets new standards of efficiency, making these vacuum pumps the ideal solution for tasks in load lock and transfer chambers, as well as in processes such as metrology, lithography, physical vapor deposition (PVD) and rapid thermal annealing (RTA).

The COBRA BC Premium Efficiency series equipped with the latest Busch VacBoost technology meets today’s demand for maximum energy savings and environmental sustainability through 40% lower energy consumption compared to standard vacuum generators. An intelligent stand-by mode, along with a wide range of flexible idle modes, offers additional energy savings potential. High reliability and minimal maintenance further reduce total cost of ownership.

Due to the sophisticated bell shaped cantilever construction, the twin rotor with variable pitch screws is mounted only on the motor side, while the unique “flying bearing” design makes inlet bearings unnecessary. As a result, the pumped medium does not come in contact with the bearings. This ensures clean vacuum generation and allows the full recovery of pumped gases. The direct gas path between inlet and outlet prevents dead spaces and ensures there are no process deposits inside the compression chamber.

The patented self-balancing screw design and screw rotor mounted precisely at the center of gravity ensure excellent running qualities and provide high uptime. A directly mounted canned motor makes the dimensions of the COBRA BC series very compact.

The fully open communication protocol (Modbus TCP-IP) allows control of all functionalities, including idle modes and variable speed drive. It can easily be adapted to a specific network protocol using standard interface components.

COBRA Premium Efficiency– the next level energy saving vacuum pumps.

Would you like to know more?
Contact us directly (Busch United States):
+1 757 463 7800 Get in contact

Technical specifications
Two screw rotors inside the cylinder of the COBRA BC 0100 F Premium Efficiency rotate in opposite directions. The pumped medium is trapped between the cylinder and screw chambers, compressed, and transported to the gas outlet. During the compression process the screw rotors do not come into contact with each other or the cylinder. Thus, no lubricants or operating fluids are required in the compression chamber. The advanced screw design results in lower electrical energy consumption and a lower compressed gas heat load compared to standard screw designs. COBRA BC series vacuum pumps use efficient direct water cooling resulting in an even temperature distribution throughout the pump body, and providing thermal stability throughout the process.

COBRA BC 0100 / 0200 F Premium Efficiency
COBRA BC 0100 / 0200 F Premium Efficiency
Pumping speed

Air at 20 °C. Tolerance: ± 10%

Pumping speed
Technical data COBRA BC 0100 F Premium Efficiency COBRA BC 0200 F Premium Efficiency
Compressed dry air consumption *
* Stickstoff kann als Alternative verwendet werden


COBRA BC 0100 / 0200 F Premium Efficiency

Standard News

Latest News