Proven technology, proven design –
decide for the best solution

MINK MI 1502 BP

  • Flexible:
    application-oriented
  • Reliable
  • Nearly Maintenance-Free:
    dry and contact-free compression


Mink claw compressors have been specially developed for the reliable compression of air and other gases. Modern Mink claw technology ensures an efficient and constant overpressure supply for numerous industrial applications of up to 2.0 bar(g). The output of Mink claw compressors is determined by the choice of motor. Motors may be selected to provide between 0.5 and 2.0 bar(g) as required by the application.

The contact-free operating principle of claw technology provides the benefit of nearly maintenance-free operation: None of the internal moving parts of the compressor come in contact with each other, so components are not subject to wear. Servicing tasks such as inspection and replacement of worn parts are eliminated completely.

The proven, completely dry-running claw technology of Mink claw compressor allows them to run without operating fluids in the compression chamber. The pumped medium is not contaminated, and may be used later without filtration or cleaning. In addition, no costs arise for the purchase, replacement and disposal of operating fluids.

Mink claw compressors are air-cooled, so no effort for the installation and maintenance of a cooling system is required. Their contact- free operating principle allows them to run very efficiently, and the volume flow remains constantly high throughout the entire life cycle.

The outstanding reliability and long service lifetime of Mink claw compressors are also a result of the contact-free and dry compression. An intelligent sound insulation design allows Mink claw compressors to operate at low noise levels.


Mink – efficient and reliable compressed air generation.

Mink – efficient and reliable compressed air generation.

Want to know more?
Contact us directly (Busch Finland):
+358 (0)9 774 60 60 Get in contact

Technical Specifications

Technical specifications
Mink claw compressors feature two clawshaped rotors that move in opposite directions, mounted in a housing. The shape of these claw rotors extracts, compresses (in two stages) and expels air or gas. The rotors do not come in contact with each other or the housing, so no lubricants or operating fluids are required in the compression chamber. The minimal clearance between the claw rotors and the chamber housing optimizes the internal seal and ensures a constantly high volume flow. A synchronizing gearbox maintains precise rotor timing. Mink claw compressors are driven by a directly flange-mounted motor of efficiency class IE3. They are equipped with an inlet filter and a pressure relief valve as standard.

Dimensional drawing MINK MI 1502 BP
MINK MI 1502 BP
Volume flow

Air at 20 ºC. Tolerance: ± 10%

50 Hz 60 Hz
Volume flow
Technical data MINK MI 1502 BP
Volume flow 500 m³/h (at inlet)  
Overpressure 0.8 | 1.2 | 1.6 | 2.0 bar(g)
Nominal motor rating 15.0 | 18.5 | 22.0 | 25.0 kW
Nominal motor speed 3000 min-1
Noise level (ISO 2151) 87 dB(A)*
Weight approx. 390 kg
Dimensions (L x W x H) 1500 x 905 x 580 mm
Gas outlet G 3"
* complies with accuracy class 2 at operating point of 1.0 bar(g)

Technical Specifications

Technical specifications
Mink claw compressors feature two clawshaped rotors that move in opposite directions, mounted in a housing. The shape of these claw rotors extracts, compresses (in two stages) and expels air or gas. The rotors do not come in contact with each other or the housing, so no lubricants or operating fluids are required in the compression chamber. The minimal clearance between the claw rotors and the chamber housing optimizes the internal seal and ensures a constantly high volume flow. A synchronizing gearbox maintains precise rotor timing. Mink claw compressors are driven by a directly flange-mounted motor of efficiency class IE3. They are equipped with an inlet filter and a pressure relief valve as standard.

Dimensional drawing
MINK MI 1502 BP
MINK MI 1502 BP
Volume flow

Air at 20 ºC. Tolerance: ± 10%

50 Hz
60 Hz
Volume flow
Technical data MINK MI 1502 BP
Volume flow 500 m³/h (at inlet)  
Overpressure 0.8 | 1.2 | 1.6 | 2.0 bar(g)
Nominal motor rating 15.0 | 18.5 | 22.0 | 25.0 kW
Nominal motor speed 3000 min-1
Noise level (ISO 2151) 87 dB(A)*
Weight approx. 390 kg
Dimensions (L x W x H) 1500 x 905 x 580 mm
Gas outlet G 3"
* complies with accuracy class 2 at operating point of 1.0 bar(g)

Downloads

MINK MI 1502 BP

You did not find a suitable product?

Standard News

Topic News
  • Energy-Efficient Packaging of Pizza Toppings
    Pepperoni for topping pizzas is the core product of Danish Crown Toppings. A total of 15.0000 tons of this spicy pizza topping are produced every year. That's enough to top 300 million pizzas. The...
  • Enormous energy savings thanks to the right choice of vacuum generation
    The Danish company Tvilum is one of the largest manufacturers of flat pack furniture for self-assembly and sells eight million pieces of furniture a year all over the world through various...
  • Improving Separation Efficiency of Sand Traps with Claw Compressors
    As the first treatment step in wastewater treatment facilities, aerated sand traps are an important process step for optimum and economical wastewater treatment. Separating out sand and other...
  • Modern vacuum technology for melt degassing during extrusion
    As a compounding specialist, the company PolyComp GmbH is both a contract manufacturer and licensed producer of complex engineering plastics. Its products range from high-temperature plastics and...
  • Efficient vacuum supply for motor home production
    The company Dethleffs GmbH & Co. KG produces a wide range of caravans and motor homes in a variety of sizes and designs for customers all over the world. Based in Isny in the Allgäu in Germany,...

Standard News

Latest News