Proven technology, proven design –
decide for the best solution

MINK MV 0040 - 0080 C Synchro

  • Latest Claw Vacuum Technology
  • Quiet:
    lowest noise level due to a state-of-the art acoustic design, can be installed at workstations
  • Efficient:
    low energy consumption, minimized operating costs
  • Compact:
    smallest footprint in their performance class
  • Flexible:
    application oriented thanks to an intelligent variable speed drive
     

Mink MV claw vacuum pumps are the result of continuous further development in claw vacuum technology by the market leader in dry claw vacuum pumps. Decades of experience in countless applications have led to substantial improvements in important aspects of the Mink MV series.

The optimized sound insulation of the Mink MV is manufactured according to the latest developments in acoustic design. The low noise levels generated allow operation in the immediate vicinity of workstations. The sophisticated design of Busch claw vacuum technology allows Mink MV vacuum pumps to operate at exceptionally high efficiency levels, which has a positive effect on the pumping speed and energy consumption. The compact dimensions of Mink MV vacuum pumps permit their installation in the smallest of floor areas.

All three models of Mink MV Synchro are fitted with a frequency converter and synchronous drive. The frequency converter is set by default to the maximum speed, and can be switched by the power supply. The system can receive external control commands via digital and/or analog inputs.

The control settings of the Mink MV Synchro can be adjusted to match the process exactly. A manual control unit, a parameter configuration kit or a fieldbus module may be used for this purpose.

The manual control unit allows the motor speed to be set, and also permits lots of other frequency converter functions to be displayed and altered. The vacuum system may be controlled by a computer using the parameter configuration kit (accessory). Various fieldbus modules are available to connect Mink MV vacuum pumps to a process control system.

The contact-free operating principle of claw vacuum technology provides the benefit of nearly maintenance-free operation: None of the internal moving parts of the vacuum pump come in contact with each other, so components are not subject to wear. Servicing tasks such as inspection and replacement of worn parts are eliminated completely.

The proven, completely dry claw vacuum technology of Mink claw pumps allows them to run without operating fluids in the compression chamber. Mink claw vacuum pumps are air-cooled, so no effort for the installation and maintenance of a cooling system is required. The outstanding reliability and long service lifetime of Mink claw vacuum pumps are also a result of the contact-free and dry compression.


Mink MV Synchro – efficient and reliable vacuum generation, tailored to your process.

Mink MV Synchro – efficient and reliable vacuum generation, tailored to your process.

Want to know more?
Contact us directly (Busch South Africa):
+27 (0)11 856 0650 Get in contact

Technical Specifications

Technical specifications
Mink claw vacuum pumps feature two claw-shaped rotors that move in opposite directions, mounted in a housing. The shape of these claw rotors extracts, compresses and expels air or gas. The rotors do not come in contact with each other or the housing, so no lubricants or operating fluids are required in the compression chamber. The minimal clearance between the rotors and the chamber housing optimizes the internal seal and ensures constantly high pumping speeds. An effective air cooling system ensures optimal operating temperatures. A synchronizing gearbox maintains precise rotor timing. Mink MV 0040 – 0080 C Synchro are driven by a directly mounted synchronous motor. Operation with a frequency converter allows the pumping speed to be matched precisely to process demand.

Accessories/Technical options

  • Manual control unit for easy vacuum pump control
  • Parameter configuration kit for alteration of control settings by a computer, including software
  • Pressure transmitter for pressure-regulated vacuum pump operation
  • Inlet filter
Dimensional Drawing MINK MV 0040 - 0080 C Synchro
MINK MV 0040 - 0080 C Synchro
Pumping Speed

Air at 20 °C. Tolerance: ± 10%

50 Hz 60 Hz
Pumping Speed
Technical data MV 0040 C MV 0060 C MV 0080 C
Nominal pumping speed 40 m³/h 60 m3/h 80 m³/h
Ultimate pressure 40 hPa (mbar) 40 hPa (mbar) 40 hPa (mbar)
Power consumption (motor + fan) 1.3 kW 1.7 kW 2.1 kW
Nominal motor speed 1200 - 4200 min-1 1200 - 4200 min-1 1200 - 4800 min-1
Noise level (ISO 2151) 62* dB(A) 68* dB(A) 71 dB(A)*
Weight approx. 80 kg 85 kg 87 kg
Dimensions (L x W x H) 585 x 345 x 370 mm 610 x 345 x 370 mm 610 x 345 x 370 mm
Gas inlet / outlet G 1 ¼" / G ¾" G 1 ¼" / G ¾" G 1 ¼" / G ¾"
* average at ultimate pressure

Technical Specifications

Technical specifications
Mink claw vacuum pumps feature two claw-shaped rotors that move in opposite directions, mounted in a housing. The shape of these claw rotors extracts, compresses and expels air or gas. The rotors do not come in contact with each other or the housing, so no lubricants or operating fluids are required in the compression chamber. The minimal clearance between the rotors and the chamber housing optimizes the internal seal and ensures constantly high pumping speeds. An effective air cooling system ensures optimal operating temperatures. A synchronizing gearbox maintains precise rotor timing. Mink MV 0040 – 0080 C Synchro are driven by a directly mounted synchronous motor. Operation with a frequency converter allows the pumping speed to be matched precisely to process demand.

Accessories/Technical options

  • Manual control unit for easy vacuum pump control
  • Parameter configuration kit for alteration of control settings by a computer, including software
  • Pressure transmitter for pressure-regulated vacuum pump operation
  • Inlet filter
Dimensional Drawing
MINK MV 0040 - 0080 C Synchro
MINK MV 0040 - 0080 C Synchro
Pumping Speed

Air at 20 °C. Tolerance: ± 10%

50 Hz
60 Hz
Pumping Speed
Technical data MV 0040 C MV 0060 C MV 0080 C
Nominal pumping speed 40 m³/h 60 m3/h 80 m³/h
Ultimate pressure 40 hPa (mbar) 40 hPa (mbar) 40 hPa (mbar)
Power consumption (motor + fan) 1.3 kW 1.7 kW 2.1 kW
Nominal motor speed 1200 - 4200 min-1 1200 - 4200 min-1 1200 - 4800 min-1
Noise level (ISO 2151) 62* dB(A) 68* dB(A) 71 dB(A)*
Weight approx. 80 kg 85 kg 87 kg
Dimensions (L x W x H) 585 x 345 x 370 mm 610 x 345 x 370 mm 610 x 345 x 370 mm
Gas inlet / outlet G 1 ¼" / G ¾" G 1 ¼" / G ¾" G 1 ¼" / G ¾"
* average at ultimate pressure

Downloads

MINK MV 0040 - 0080 C Synchro

Busch Vacuum App

Register Your Vacuum Pump – Save Time, Costs and Energy!

Register Busch vacuum pumps and profit from time- and cost-saving features.
 

Vacuum-App.png

Standard News

Latest News