Proven technology, proven designs –
quality products you can trust.

MINK MV 0040 - 0080 D
Synchro

  • Latest Claw Vacuum Technology
  • Quiet:
    lowest sound level due to a state-of-the-art acoustic design, can be installed at workstations
  • Efficient: 
    low energy consumption, minimized operating costs 
  • Compact: 
    smallest footprint in its performance class
  • Application-Oriented: 
    thanks to an intelligent variable speed drive, Aqua version available


Mink MV claw vacuum pumps are the result of continuous further development in claw vacuum technology by the market leader in dry claw vacuum pumps. Decades of experience in countless applications have led to substantial improvements in important aspects of the Mink MV series.

The optimized sound insulation of the Mink MV is manufactured according to the latest developments in acoustic design. The low sound levels generated allow operation in the immediate vicinity of workstations. The sophisticated design of Busch claw vacuum technology allows Mink MV vacuum pumps to operate at exceptionally high efficiency levels, which has a positive effect on the pumping speed and energy consumption. The compact dimensions of Mink MV vacuum pumps permit their installation in the smallest of floor areas.

All three models of Mink MV 0040 – 0080 C are fitted with a frequency converter and synchronous drive. The frequency converter is set by default to the maximum speed, and can be switched by the power supply. The system can receive external control commands via digital and/or analog inputs.

The control settings of the Mink MV 0040 – 0080 C can be adjusted to match the process exactly. A manual control unit, a parameter configuration kit or a fieldbus module may be used for this purpose.

The manual control unit allows the motor speed to be set, and also permits lots of other frequency converter functions to be displayed and altered. The vacuum system may be controlled by computer using the parameter configuration kit (accessory). Various fieldbus modules are available to connect Mink MV vacuum pumps to a process control system.

The contact-free operating principle of claw vacuum technology provides the additional benefit of nearly maintenance-free operation: None of the internal moving parts of the vacuum pump come in contact with each other, so components are not subject to wear. Servicing tasks such as inspection and replacement of worn parts are eliminated completely.

The proven, completely dry claw vacuum technology of Mink claw pumps allows them to run without operating fluids in the compression chamber. Mink claw vacuum pumps are air cooled, so no effort for the installation and maintenance of a cooling system is required. The outstanding reliability and long service lifetime of Mink claw vacuum pumps are also a result of the contact-free and dry compression.


Mink – the most efficient industrial vacuum generator, tailored to your process

Mink – the most efficient industrial vacuum generator, tailored to your process

Would you like to know more?
Contact us directly (Busch United States):
1-800-USA-PUMP Get in contact

Technical Specifications

Technical specifications
Mink claw vacuum pumps feature two claw-shaped rotors that move in opposite directions, mounted in a housing. The shape of these claw rotors extracts, compresses and expels air or gas. The rotors do not come in contact with each other or the housing, so no lubricants or operating fluids are required in the compression chamber. The minimal clearance between the rotors and the chamber housing optimizes the internal seal and ensures constantly high pumping speeds. An effective air cooling system guarantees optimal operating temperatures. A synchronizing gearbox maintains precise rotor timing. Mink MV 0040 – 0080 D are driven by a directly mounted synchronous motor. Operation with a frequency converter allows the pumping speed to be matched precisely to process demand.

Accessories/Technical options

  • Manual control unit for easy vacuum pump control
  • Parameter configuration kit for alteration of control settings by computer, including software
  • Pressure transmitter for pressure-regulated vacuum pump operation
  • Inlet filter
Dimensional drawing MINK MV 0040 - 0080 D Synchro
MINK MV 0040 - 0080 D Synchro
Pumping Speed

Air at 70 ºF. Tolerance: ± 10%

60 Hz
Pumping Speed
Technical data MV 0040 D MV 0060 D MV 0080 D
Nominal pumping speed 23.5 ACFM 35.3 ACFM 47 ACFM
Ultimate pressure 30 Torr 30 Torr 30 Torr
Power consumption (motor + fan) 1.3 (1.7) kW (HP) 1.7 (2.3) kW (HP) 2.1 (2.8) kW (HP)
Nominal motor speed 1200-4200 RPM 1200-4200 RPM 1200-4800 RPM
Noise level (ISO 2151) 62* dB(A) 68* dB(A) 71 dB(A)*
Approximate weight 176 Lbs. 188 Lbs. 192 Lbs.
Dimensions (L x W x H) 23 x 13 9/16 x 14 9/16inches 24 x 13 9/16 x 14 9/16 inches 24 x 13 9/16 x 14 9/16 inches
Gas inlet / outlet G 1 ¼" / G ¾" G 1 ¼" / G ¾" G 1 ¼" / G ¾"
* average at ultimate pressure

Technical Specifications

Technical specifications
Mink claw vacuum pumps feature two claw-shaped rotors that move in opposite directions, mounted in a housing. The shape of these claw rotors extracts, compresses and expels air or gas. The rotors do not come in contact with each other or the housing, so no lubricants or operating fluids are required in the compression chamber. The minimal clearance between the rotors and the chamber housing optimizes the internal seal and ensures constantly high pumping speeds. An effective air cooling system guarantees optimal operating temperatures. A synchronizing gearbox maintains precise rotor timing. Mink MV 0040 – 0080 D are driven by a directly mounted synchronous motor. Operation with a frequency converter allows the pumping speed to be matched precisely to process demand.

Accessories/Technical options

  • Manual control unit for easy vacuum pump control
  • Parameter configuration kit for alteration of control settings by computer, including software
  • Pressure transmitter for pressure-regulated vacuum pump operation
  • Inlet filter
Dimensional drawing
MINK MV 0040 - 0080 D Synchro
MINK MV 0040 - 0080 D Synchro
Pumping Speed

Air at 70 ºF. Tolerance: ± 10%

60 Hz
Pumping Speed
Technical data MV 0040 D MV 0060 D MV 0080 D
Nominal pumping speed 23.5 ACFM 35.3 ACFM 47 ACFM
Ultimate pressure 30 Torr 30 Torr 30 Torr
Power consumption (motor + fan) 1.3 (1.7) kW (HP) 1.7 (2.3) kW (HP) 2.1 (2.8) kW (HP)
Nominal motor speed 1200-4200 RPM 1200-4200 RPM 1200-4800 RPM
Noise level (ISO 2151) 62* dB(A) 68* dB(A) 71 dB(A)*
Approximate weight 176 Lbs. 188 Lbs. 192 Lbs.
Dimensions (L x W x H) 23 x 13 9/16 x 14 9/16inches 24 x 13 9/16 x 14 9/16 inches 24 x 13 9/16 x 14 9/16 inches
Gas inlet / outlet G 1 ¼" / G ¾" G 1 ¼" / G ¾" G 1 ¼" / G ¾"
* average at ultimate pressure

Downloads

MINK MV 0040 - 0080 D
Synchro

You did not find a suitable product?

Standard News

Topic News
  • Enormous energy savings thanks to the right choice of vacuum generation
    The Danish company Tvilum is one of the largest manufacturers of flat pack furniture for self-assembly and sells eight million pieces of furniture a year all over the world through various...
  • Improving Separation Efficiency of Sand Traps with Claw Compressors
    As the first treatment step in wastewater treatment facilities, aerated sand traps are an important process step for optimum and economical wastewater treatment. Separating out sand and other...
  • Modern vacuum technology for melt degassing during extrusion
    As a compounding specialist, the company PolyComp GmbH is both a contract manufacturer and licensed producer of complex engineering plastics. Its products range from high-temperature plastics and...
  • Efficient vacuum supply for motor home production
    The company Dethleffs GmbH & Co. KG produces a wide range of caravans and motor homes in a variety of sizes and designs for customers all over the world. Based in Isny in the Allgäu in Germany,...
  • Saving Energy when Generating Vacuum for Clamping Aluminum Sheets
    The production of high-precision aircraft components made of light metal is among the fields of activity of A&T Group. The company processes aluminum sheets from 0.3 to 8 millimeters thick and up...

Standard News

Latest News