Image Description

Dry Claw Vacuum
Pumps and Compressors

Principle of Operation

The main components of dry claw vacuum pump and compressor are two claws which turn in opposite directions in a housing. These claws are only separated from one another by a minimum gap and do not touch. Air intake is via a filter. The intake air is compressed by the special geometrical form of the claws and expelled at the delivery connection on the end. A synchronized gear ensures exact synchronism of the two claws.

Products using this technology:

Mink

Dry Claw Vacuum Pumps and Compressors

Principle of Operation

With claw vacuum pumps, two claw-shaped rotors turn in opposite direction inside the housing. Due to the shape of these claw rotors, the air or gas is sucked in, compressed and discharged. The claw rotors do not come into contact either with each other nor with the cylinder in which they are rotating. Tight clearances between the claw rotors and the housing optimise the internal seal and guarantee a consistently high pumping speed. A synchronisation gearbox ensures exact synchronisation of the claw rotors.

Claw vacuum pumps are driven by a directly flange-mounted asynchronous motor, with an efficiency class IE2.  Claw vacuum pumps are ideally suited to use with frequency-controlled drives. Claw vacuum pumps are available in a wide range of sizes.

There are also variants for special applications such as dust and gas explosion protection, high steam contents, gas tightness and increased oxygen contents.

 

Products using this technology:

Mink


Want to know more?
Contact us directly (Busch Thailand):
+66 2337 03 60-2 Get in contact
Want to know more?
Contact us directly (Busch Thailand):
+66 2337 03 60-2 Get in contact

Standard News

Topic News
  • Busch Innovation in Vacuum Award 2018 for Lapierre
    The 2018 Busch Innovation in Vacuum Award has been presented to the Canadian company Les Équipements Lapierre (Lapierre Equipment Inc.). By employing Busch's Mink dry claw vacuum pumps, the company...
  • Economical Vacuum and Blast Air Supplies Through Centralization
    The management of the printing works CPI Clausen & Bosse GmbH realized at an early stage that a centralized vacuum and blast air supply could operate more economically than individual compressors,...
  • Innovation in Vacuum Busch Award
    The Busch Vacuum Innovation Award 2014 was presented on the 31st March 2015 at the Busch main offices in Maulburg.
  • Safe and fast mooring of vessels and ferries with vacuum technology
    Cavotec Specimas SpA has developed an automated vessel mooring system which enables ships to be held securely to harbour quays by vacuum. MoorMaster™ systems are used worldwide to moor ships...
  • State-of-the-art door production with efficient vacuum supply
    Maulburg - Joro Türen GmbH produces high-quality utility doors in Renchen, Germany, for protection against fire, smoke, burglary and noise up to 52 dB. The doors are sold to distributors for...
  • Vacuum Conveying of Almonds in Marzipan Production
    Maulburg - From its modest origins, traditional Berlin-based company Georg Lemke GmbH & Co. KG has developed into a state-of-the-art operation that after 104 years of using pressure conveying in...
  • Huge Energy Savings in furniture Manufacture with Central Vacuum Supply
    ADA Möbelfabrik, headquartered in Anger (Austria), is one of Europe’s largest manufacturers of furniture. Upholstered furniture, beds, mattresses and slatted frames are produced for the Austrian...

Standard News

Latest News