Proven technology, proven design –
decide for the best solution
Carbon dioxide emissions will have to be further reduced in the coming decades. In order to achieve the target set by the EU and G8, emission-free mobility needs to be promoted. Fuel cells are an excellent solution for the green transport of the future.
Busch has developed the key solution for fuel cells: MINK MH – the first hydrogen-approved claw compressor worldwide.
It is specially developed for the recirculation of hydrogen in fuel cells. It is resistant to severe vibration levels and may be operated under extreme temperature conditions, between -30°C and +95°C.
All components are mounted in one unit. This "all-in-one" design leads to a very small footprint making the Mink MH the optimum solution for every fuel cell.
Its compression is contact-free and completely dry. This means that no operating fluids are present in the compression chamber. None of the internal moving parts of the compressor come in contact with each other. Components are not subject to wear and servicing tasks are eliminated completely.
An integrated variable speed drive allows the volume flow to be altered dynamically. This means, that the Mink MH always operates within the most efficient output range. The volume flow remains constant throughout the entire life cycle of Mink MH compressors.
The CAN communication system permits parameters such as rotational speed and power consumption to be permanently recorded and controlled.
Your benefits at a glance
- Specially designed for fuel cells
- Hydrogen-approved by SGS-TÜV
- Operation under extreme temperature conditions
- Dry and contact-free operating principle
- Variable speed drive
Fields of application
Mink MH is the ideal solution for the following sectors in which hydrogen recirculation plays an important role:
- Transportation: automotive, rail, maritime, aviation
- Stationary: electricity generation
Operating principle fuel cell
In a fuel cell, a combination of hydrogen (coming from the tank) and oxygen (from the air) produces electricity, heat and water as a by-product.
A fuel cell consists of two electrodes, an anode and a cathode. A membrane separates them from each other and is responsible for the ion transport.
Hydrogen is supplied on the anode side, oxygen on the cathode side. The hydrogen molecules are split into protons and electrons.
The hydrogen protons diffuse through the membrane to the cathode, where they react with the oxygen to form water, thereby releasing energy.
It is important that oxygen does not diffuse into the hydrogen loop to prevent explosive conditions. Therefore, hydrogen is injected in a higher quantity. This excess hydrogen shall not be released to the atmosphere because of legal regulations and efficiency reasons.
The solution is to recirculate it back to the system inlet. For that purpose, our MINK MH claw compressor comes into operation. It has been specially developed for the recirculation of excess hydrogen in fuel cells and is hydrogen-approved by TÜV Saar.
- At its state-of-the-art manufacturing plant in Leingarten, Germany, Fuyao Europe produces ready-to-install glass windows for the automobile industry from raw glass. To hold the windshields during...
- Pepperoni for topping pizzas is the core product of Danish Crown Toppings. A total of 15.0000 tons of this spicy pizza topping are produced every year. That's enough to top 300 million pizzas. The...
- The Danish company Tvilum is one of the largest manufacturers of flat pack furniture for self-assembly and sells eight million pieces of furniture a year all over the world through various...
- As the first treatment step in wastewater treatment facilities, aerated sand traps are an important process step for optimum and economical wastewater treatment. Separating out sand and other...
- As a compounding specialist, the company PolyComp GmbH is both a contract manufacturer and licensed producer of complex engineering plastics. Its products range from high-temperature plastics and...
Press ReleasesVacuum technology enables optimum cooling of Corona vaccines
Press ReleasesVacuum Ensures Safe Storage of Corona Vaccine
Case StudiesEnergy-Efficient Vacuum Supply in the Production of Windshields
ProductsThe First TÜV-Certified Hydrogen Recirculation Blower for Fuel Cells
Case StudiesProducing Energy with Less Energy
Case StudiesGreater Efficiency and Reduced Cycle Times in Packaging Poultry Sausage with R5
Case Studies, AerationPerfect water treatment thanks to adjustable rotary lobe blowers
Press Releases12 Benefits of Centralized Vacuum Supply
Case StudiesScrew Vacuum Pump for Arc PVD Coating
Press ReleasesSaving Energy with Intelligent Vacuum Technology
ProductsNew Leak Detectors from Busch
ProductsDry Vacuum Technology for Chemical and Pharmaceutical Processes
Products, Company10 Considerations for Optimum Use of Vacuum Technology
Press Releases, CompanyBusch Innovation in Vacuum Award Goes to Dilo
Case StudiesEnergy-Efficient Packaging of Pizza Toppings
Press ReleasesThe Sky is No Longer the Limit for Busch Vacuum Solutions
Case StudiesEnormous energy savings thanks to the right choice of vacuum generation
Press Releases, CompanyBusch Vacuum Solutions awarded as Germany's top family business 2020 by the German Business Magazine Wirtschaftswoche
Case StudiesIncrease in sand trap effectiveness thanks to adjustable claw compressor