Tehnologie dovedită, design dovedit –
alegeți soluția cea mai bună

COBRA BC 1000 F Premium Efficiency

  • Advanced Screw Design:
    bell shaped construction, patented self-balancing screws
  • Efficient:
    best-in-class energy footprint, low cost of ownership, minimal maintenance, high uptime 
  • Reliable:
    operationally reliable  
  • Flexible:
    application-oriented  
  • Quiet:
    noise level < 62 dB(A)
  • Compact Design



The COBRA BC 1000 F Premium Efficiency is a dry screw vacuum pump in the proven COBRA BC series. State-of-the-art screw vacuum pump technology featuring a specially developed screw profile sets new standards of efficiency, making these vacuum pumps the ideal solution for tasks in load lock and transfer chambers, as well as in processes such as metrology, lithography, physical vapour deposition (PVD) and rapid thermal annealing (RTA).

The COBRA BC Premium Efficiency series equipped with the latest Busch VacBoost technology meets today’s demand for maximum energy savings and environmental sustainability through 40% lower energy consumption compared to standard vacuum generators. An intelligent stand-by mode, along with a wide range of flexible idle modes, offers additional energy savings potential. High reliability and minimal maintenance further reduce total cost of ownership.

Due to the sophisticated bell shaped cantilever construction, the twin rotor with variable pitch screws is mounted only on the motor side, while the unique “flying bearing” design makes inlet bearings unnecessary. As a result, the pumped medium does not come in contact with the bearings. This ensures clean vacuum generation and allows the full recovery of pumped gases. The direct gas path between inlet and outlet prevents dead spaces and ensures there are no process deposits inside the compression chamber.

The patented self-balancing screw design and screw rotor mounted precisely at the centre of gravity ensure excellent running qualities and guarantee high uptime. A directly mounted canned motor makes the dimensions of the COBRA BC series very compact.

The fully open communication protocol (Modbus TCP-IP) allows control of all functionalities, including idle modes and variable speed drive. It can easily be adapted to a specific network protocol using standard interface components.


COBRA Premium Efficiency– the next level energy saving vacuum pumps.

COBRA Premium Efficiency– the next level energy saving vacuum pumps.

Vreți să aflați mai multe?
Contactați-ne direct (Busch România):
+40 770 709 709 Intra în contact

Specificaţii tehnice

Technical specifications
The COBRA BC 1000 F Premium Efficiency is a screw vacuum pump combined with one vacuum booster. Two screw rotors inside the cylinder of the screw vacuum pump rotate in opposite directions. The pumped medium is trapped between the cylinder and screw chambers, compressed, and transported to the gas outlet. During the compression process the screw rotors do not come into contact with each other or the cylinder. Thus, no lubricants or operating fluids are required in the compression chamber. The advanced screw design results in lower electrical energy consumption and a lower compressed gas heat load compared to standard screw designs. COBRA BC series vacuum pumps use efficient direct water cooling resulting in an even temperature distribution throughout the pump body, and guaranteeing thermal stability throughout the process. The COBRA BC 1000 F Premium Efficiency uses a high-performance vacuum booster to optimize the system performance.

Desen
Pumping speed

Air at 20 °C. Tolerance: ± 10%

50 Hz 60 Hz
Pumping speed
Technical data COBRA BC 1000 F Premium Efficiency
Viteză nominală de pompare 955 m³/h
Presiune finală 0,001 hPa (mbar)
Nominal motor rating backing pump 1,8 kW
Nominal motor rating vacuum booster 2,9 kW
Nominal motor speed backing pump 3600 min-1
Nominal motor speed vacuum booster 5400 min-1
Power consumption at ultimate pressure / Idle mode 1,5 kW
Nivel de zgomot (ISO 2151) 62 dB(A)
Consum de apă 3,0 l/min
Compressed dry air consumption 25 l/min
Greutate aprox. 310 kg
Dimensiuni (L x W x H) 1054 x 425 x 615 mm
Admisie/evacuare gaz DN 100 ISO-K / DN 40 ISO-KF

Specificaţii tehnice

Technical specifications
The COBRA BC 1000 F Premium Efficiency is a screw vacuum pump combined with one vacuum booster. Two screw rotors inside the cylinder of the screw vacuum pump rotate in opposite directions. The pumped medium is trapped between the cylinder and screw chambers, compressed, and transported to the gas outlet. During the compression process the screw rotors do not come into contact with each other or the cylinder. Thus, no lubricants or operating fluids are required in the compression chamber. The advanced screw design results in lower electrical energy consumption and a lower compressed gas heat load compared to standard screw designs. COBRA BC series vacuum pumps use efficient direct water cooling resulting in an even temperature distribution throughout the pump body, and guaranteeing thermal stability throughout the process. The COBRA BC 1000 F Premium Efficiency uses a high-performance vacuum booster to optimize the system performance.

Desen
Pumping speed

Air at 20 °C. Tolerance: ± 10%

50 Hz
60 Hz
Pumping speed
Technical data COBRA BC 1000 F Premium Efficiency
Viteză nominală de pompare 955 m³/h
Presiune finală 0,001 hPa (mbar)
Nominal motor rating backing pump 1,8 kW
Nominal motor rating vacuum booster 2,9 kW
Nominal motor speed backing pump 3600 min-1
Nominal motor speed vacuum booster 5400 min-1
Power consumption at ultimate pressure / Idle mode 1,5 kW
Nivel de zgomot (ISO 2151) 62 dB(A)
Consum de apă 3,0 l/min
Compressed dry air consumption 25 l/min
Greutate aprox. 310 kg
Dimensiuni (L x W x H) 1054 x 425 x 615 mm
Admisie/evacuare gaz DN 100 ISO-K / DN 40 ISO-KF

Descărcări

COBRA BC 1000 F Premium Efficiency

Nu ați găsit un produs potrivit?

Standard News

Latest News