Sprawdzona technologia i konstrukcje  –
wybierz najlepsze rozwiązanie

MINK MV 0040 - 0080 D
Synchro

  • Latest Claw Vacuum Technology
  • Quiet:
    low noise level due to a state-of-the art acoustic design, can be installed at workstations
  • Efficient:
    low energy consumption, low operating costs
  • Compact:
    smallest footprint in their performance class
  • Flexible:
    application oriented thanks to an intelligent variable speed drive
     

Mink MV claw vacuum pumps are the result of continuous further development in claw vacuum technology by the market leader in dry claw vacuum pumps. Decades of experience in countless applications have led to substantial improvements in important aspects of the Mink MV series.

The optimized sound insulation of the Mink MV is manufactured according to the latest developments in acoustic design. The low noise levels generated allow operation in the immediate vicinity of workstations. The sophisticated design of Busch claw vacuum technology allows Mink MV vacuum pumps to operate at very high efficiency levels, which has a positive effect on the pumping speed and energy consumption. The compact dimensions of Mink MV vacuum pumps permit their installation in the smallest of floor areas.

All three models of Mink MV Synchro are fitted with a frequency converter and synchronous drive. The frequency converter is set by default to the maximum speed, and can be switched by the power supply. The system can receive external control commands via digital and/or analog inputs.

The control settings of the Mink MV Synchro can be adjusted to match the process exactly. A manual control unit, a parameter configuration kit or a fieldbus module may be used for this purpose.

The manual control unit allows the motor speed to be set, and also permits lots of other frequency converter functions to be displayed and altered. The vacuum system may be controlled by a computer using the parameter configuration kit (accessory). Various fieldbus modules are available to connect Mink MV vacuum pumps to a process control system.

The contact-free operating principle of claw vacuum technology provides the benefit of nearly maintenance-free operation: None of the internal moving parts of the vacuum pump come in contact with each other, so components are not subject to wear. Servicing tasks such as inspection and replacement of worn parts are eliminated completely.

The proven, completely dry claw vacuum technology of Mink claw pumps allows them to run without operating fluids in the compression chamber. Mink claw vacuum pumps are air-cooled, so no effort for the installation and maintenance of a cooling system is required. The outstanding reliability and long service lifetime of Mink claw vacuum pumps are also a result of the contact-free and dry compression.


Mink MV Synchro – efficient and reliable vacuum generation, tailored to your process.

Mink MV Synchro – efficient and reliable vacuum generation, tailored to your process.

Chcesz uzyskać więcej informacji?
Skontaktuj się z nami bezpośrednio (Busch Polska):
+48 (0)54 231 54 00 Skontaktuj się z nami

Dane techniczne

Technical specifications
Mink claw vacuum pumps feature two claw-shaped rotors that move in opposite directions, mounted in a housing. The shape of these claw rotors extracts, compresses and expels air or gas. The rotors do not come in contact with each other or the housing, so no lubricants or operating fluids are required in the compression chamber. The minimal clearance between the rotors and the chamber housing optimizes the internal seal and ensures constantly high pumping speeds. An effective air cooling system ensures optimal operating temperatures. A synchronizing gearbox maintains precise rotor timing. Mink MV 0040 – 0080 D Synchro are driven by a directly mounted synchronous motor. Operation with a frequency converter allows the pumping speed to be matched precisely to process demand.

Accessories/Technical options

  • Manual control unit for easy vacuum pump control
  • Parameter configuration kit for alteration of control settings by a computer, including software
  • Pressure transmitter for pressure-regulated vacuum pump operation
  • Inlet filter
Rysunku MINK MV 0040 - 0080 D Synchro
MINK MV 0040 - 0080 D Synchro
Pumping Speed

Air at 20 °C. Tolerance: ± 10%

50 Hz 60 Hz
Pumping Speed
Dane techniczne MV 0040 D MV 0060 D MV 0080 D
Wydajność nominalna 40 m³/h 60 m3/h 80 m³/h
Ciśnienie końcowe 40 hPa (mbar) 40 hPa (mbar) 40 hPa (mbar)
Power consumption (motor + fan) 1,3 kW 1,7 kW 2,1 kW
Nominalne obroty silnika 1200 - 4200 min-1 1200 - 4200 min-1 1200 - 4800 min-1
Poziom hałasu (ISO 2151) 62* dB(A) 68* dB(A) 71 dB(A)*
Waga (w przybliżeniu) 80 kg 85 kg 87 kg
Wymiary (L × W × H) 585 x 345 x 370 mm 610 x 345 x 370 mm 610 x 345 x 370 mm
Wlot/wylot gazu G 1 ¼" / G ¾" G 1 ¼" / G ¾" G 1 ¼" / G ¾"
* average at ultimate pressure

Dane techniczne

Technical specifications
Mink claw vacuum pumps feature two claw-shaped rotors that move in opposite directions, mounted in a housing. The shape of these claw rotors extracts, compresses and expels air or gas. The rotors do not come in contact with each other or the housing, so no lubricants or operating fluids are required in the compression chamber. The minimal clearance between the rotors and the chamber housing optimizes the internal seal and ensures constantly high pumping speeds. An effective air cooling system ensures optimal operating temperatures. A synchronizing gearbox maintains precise rotor timing. Mink MV 0040 – 0080 D Synchro are driven by a directly mounted synchronous motor. Operation with a frequency converter allows the pumping speed to be matched precisely to process demand.

Accessories/Technical options

  • Manual control unit for easy vacuum pump control
  • Parameter configuration kit for alteration of control settings by a computer, including software
  • Pressure transmitter for pressure-regulated vacuum pump operation
  • Inlet filter
Rysunku
MINK MV 0040 - 0080 D Synchro
MINK MV 0040 - 0080 D Synchro
Pumping Speed

Air at 20 °C. Tolerance: ± 10%

50 Hz
60 Hz
Pumping Speed
Dane techniczne MV 0040 D MV 0060 D MV 0080 D
Wydajność nominalna 40 m³/h 60 m3/h 80 m³/h
Ciśnienie końcowe 40 hPa (mbar) 40 hPa (mbar) 40 hPa (mbar)
Power consumption (motor + fan) 1,3 kW 1,7 kW 2,1 kW
Nominalne obroty silnika 1200 - 4200 min-1 1200 - 4200 min-1 1200 - 4800 min-1
Poziom hałasu (ISO 2151) 62* dB(A) 68* dB(A) 71 dB(A)*
Waga (w przybliżeniu) 80 kg 85 kg 87 kg
Wymiary (L × W × H) 585 x 345 x 370 mm 610 x 345 x 370 mm 610 x 345 x 370 mm
Wlot/wylot gazu G 1 ¼" / G ¾" G 1 ¼" / G ¾" G 1 ¼" / G ¾"
* average at ultimate pressure

Pobrane pliki

MINK MV 0040 - 0080 D
Synchro

Nie znalazłeś odpowiedniego produktu?

Standard News

Tematy aktualności
  • Plastykowe elementy zestawów do testów na koronawirusa produkowane za pomocą próżni
    Na całym świecie wciąż panuje pandemia i testy na koronawirusa stanowią ważny punkt umożliwiający ratowanie życia i szybką pomoc zarażonym. Wg Instytutu Roberta Kocha od wybuchu pandemii w...
  • Szybka dostawa do nowych szpitali
    Do miasta Wuhan w Chinach dostarczono dwanaście naszych dużych pomp próżniowych, pomagających leczyć pacjentów zarażonych koronawirusem. W mieście Wuhan w ciągu zaledwie kilku dni zbudowano dwa...
  • Nagroda Busch w dziedzinie innowacyjnej technologii próżniowej w roku 2018 przyznana producentowi syropu klonowego i sprzętu do pozyskiwania syropu klonowego
    Nagroda Busch w dziedzinie innowacyjnej technologii próżniowej w roku 2018 została przyznana kanadyjskiej firmie Les Équipements Lapierre (Lapierre Equipment Inc.). Dzięki zastosowaniu suchych...
  • Mniejsze koszty zużycia energii i większa niezawodność dzięki kłowym pompom próżniowym Mink do obróbki CNC
    Wysokiej jakości meble do siedzenia są głównym produktem firmy Kvist Industries A/S. Elementy mebli duńskiej firmy są wykonane z litego lub profilowanego drewna. Automatyczną produkcję części...
  • Nowoczesna technologia próżniowa w procesie infuzji żywicy przy budowie jachtów
    Firma Galeon jest jednym z czołowych producentów luksusowych jachtów w Europie. Jej dwa zakłady znajdują w pobliżu Gdańska. Jachty motorowe firmy Galeon mają długość do 25 m, a ich główne...

Standard News

Ostatnie aktualności