Profitable solar business - Electricity from sunlight is only possible with vacuum

Profitable solar business - Electricity from sunlight is only possible with vacuum

In 2019, Abu Dhabi put the largest single solar park in the world into operation, but even larger projects are already planned. In the manufacturing of solar panels, vacuum plays a crucial role in all important steps, just like Busch vacuum pumps.

At the end of June 2019, the Noor Abu Dhabi solar park was connected to the desert state's grid. With 3.2 million solar collectors on an area of eight square kilometers, according to the operator it is the largest solar plant at one location in the world. It will produce up to 1.18 gigawatts of peak power and thus reduce carbon dioxide emissions by one million tons per year. This corresponds to the CO2 footprint of 200,000 cars. At the inauguration, the electricity price for customers was quoted at 2.42 US cents per kilowatt hour.

Manufacturing increasingly more efficient

Such low prices for solar power are now achieved by large modern solar parks without subsidies. Solar energy can already be produced more cheaply than electricity from fossil fuels. Thus, renewable energy moves out of the realm of state subsidies and into the sphere of profitable business. This development is due not least to the rapid progress in the manufacturing of solar panels. Vacuum technology can be found there in all important production steps.

This begins with the production of the silicon substrate, which is the basis for the solar cell. The Czochralski process is often used to obtain the required crystals. Here, the crystals are allowed to grow under vacuum. The oxygen content in the air would oxidize the high-purity silicon, which in turn would affect the properties of the highly efficient silicon wafers.

Protected layer by layer

Thin silicon slices made of the crystalline material must then be provided with electrically active layers, similar to the production of microchips. There are different processes for applying the layers with different functions. Given that the layers are applied with reactive gases that are self-igniting and often toxic, special, very safe vacuum technologies are used. After this step, the cells are already functional and can convert light into electricity. However, in this form they would not be able to withstand wind and weather – not to mention the abrasive desert sand – for long.

The panels are packed between several layers of a protective plastic and/or glass in order to protect them from destructive external influences and to ensure a long service life. This special film should adjust to the panels without gaps or air bubbles and then bond firmly to them. For this purpose, the lamination is also carried out under vacuum. For the vacuum-supported steps, many plants use Busch vacuum pumps designed exactly for the respective process.

Just a few years ago, "Solar Star I + II" in California's Mojave Desert held the world record with an output of 579 megawatts. The park, with around 1.7 million solar modules, was opened in June 2015. But only a few months later, the Kamuthi Solar Power Project in the Indian state of Tamil Nadu took the lead with 648 megawatts and 2.5 million solar modules.

The Longyangxia Dam Solar Park in the Chinese province of Qinghai then raised the mark to 850 megawatts. This figure has been exceeded by Noor Abu Dhabi since June 2019. Additional, even larger plants are already planned in Saudi Arabia, China and other countries.

Subscribe to the ‘World of Vacuum' newsletter!
Subscribe now and stay up-to-date with the latest fascinating news from the world of vacuum.