검증된 기술과 설계 기술로 최고의 솔루션을 드립니다.

MINK MV 0040 - 0080 D
Synchro

  • Latest Claw Vacuum Technology
  • Quiet:
    low noise level due to a state-of-the art acoustic design, can be installed at workstations
  • Efficient:
    low energy consumption, low operating costs
  • Compact:
    smallest footprint in their performance class
  • Flexible:
    application oriented thanks to an intelligent variable speed drive
     

Mink MV claw vacuum pumps are the result of continuous further development in claw vacuum technology by the market leader in dry claw vacuum pumps. Decades of experience in countless applications have led to substantial improvements in important aspects of the Mink MV series.

The optimized sound insulation of the Mink MV is manufactured according to the latest developments in acoustic design. The low noise levels generated allow operation in the immediate vicinity of workstations. The sophisticated design of Busch claw vacuum technology allows Mink MV vacuum pumps to operate at very high efficiency levels, which has a positive effect on the pumping speed and energy consumption. The compact dimensions of Mink MV vacuum pumps permit their installation in the smallest of floor areas.

All three models of Mink MV Synchro are fitted with a frequency converter and synchronous drive. The frequency converter is set by default to the maximum speed, and can be switched by the power supply. The system can receive external control commands via digital and/or analog inputs.

The control settings of the Mink MV Synchro can be adjusted to match the process exactly. A manual control unit, a parameter configuration kit or a fieldbus module may be used for this purpose.

The manual control unit allows the motor speed to be set, and also permits lots of other frequency converter functions to be displayed and altered. The vacuum system may be controlled by a computer using the parameter configuration kit (accessory). Various fieldbus modules are available to connect Mink MV vacuum pumps to a process control system.

The contact-free operating principle of claw vacuum technology provides the benefit of nearly maintenance-free operation: None of the internal moving parts of the vacuum pump come in contact with each other, so components are not subject to wear. Servicing tasks such as inspection and replacement of worn parts are eliminated completely.

The proven, completely dry claw vacuum technology of Mink claw pumps allows them to run without operating fluids in the compression chamber. Mink claw vacuum pumps are air-cooled, so no effort for the installation and maintenance of a cooling system is required. The outstanding reliability and long service lifetime of Mink claw vacuum pumps are also a result of the contact-free and dry compression.


Mink MV Synchro – efficient and reliable vacuum generation, tailored to your process.

Mink MV Synchro – efficient and reliable vacuum generation, tailored to your process.

추가 문의사항이 있습니까?
바로 연락 주십시오 (Busch 대한민국):
+82 (0)31 645 2700 문의하기

기술사양

Technical specifications
Mink claw vacuum pumps feature two claw-shaped rotors that move in opposite directions, mounted in a housing. The shape of these claw rotors extracts, compresses and expels air or gas. The rotors do not come in contact with each other or the housing, so no lubricants or operating fluids are required in the compression chamber. The minimal clearance between the rotors and the chamber housing optimizes the internal seal and ensures constantly high pumping speeds. An effective air cooling system ensures optimal operating temperatures. A synchronizing gearbox maintains precise rotor timing. Mink MV 0040 – 0080 D Synchro are driven by a directly mounted synchronous motor. Operation with a frequency converter allows the pumping speed to be matched precisely to process demand.

Accessories/Technical options

  • Manual control unit for easy vacuum pump control
  • Parameter configuration kit for alteration of control settings by a computer, including software
  • Pressure transmitter for pressure-regulated vacuum pump operation
  • Inlet filter
소묘 MINK MV 0040 - 0080 D Synchro
MINK MV 0040 - 0080 D Synchro
Pumping Speed

Air at 20 °C. Tolerance: ± 10%

50 Hz 60 Hz
Pumping Speed
기술 데이터 MV 0040 D MV 0060 D MV 0080 D
펌프용량 40 m³/h 60 m3/h 80 m³/h
최대 진공도 40 hPa (mbar) 40 hPa (mbar) 40 hPa (mbar)
Power consumption (motor + fan) 1.3 kW 1.7 kW 2.1 kW
모터 정격 회전속도 1200 - 4200 min-1 1200 - 4200 min-1 1200 - 4800 min-1
사운드 레벨(ISO 2151) 62* dB(A) 68* dB(A) 71 dB(A)*
중량(근사치) 80 kg 85 kg 87 kg
치수(L x W x H) 585 x 345 x 370 mm 610 x 345 x 370 mm 610 x 345 x 370 mm
가스 유입구 / 배출구 G 1 ¼" / G ¾" G 1 ¼" / G ¾" G 1 ¼" / G ¾"
* average at ultimate pressure

기술사양

Technical specifications
Mink claw vacuum pumps feature two claw-shaped rotors that move in opposite directions, mounted in a housing. The shape of these claw rotors extracts, compresses and expels air or gas. The rotors do not come in contact with each other or the housing, so no lubricants or operating fluids are required in the compression chamber. The minimal clearance between the rotors and the chamber housing optimizes the internal seal and ensures constantly high pumping speeds. An effective air cooling system ensures optimal operating temperatures. A synchronizing gearbox maintains precise rotor timing. Mink MV 0040 – 0080 D Synchro are driven by a directly mounted synchronous motor. Operation with a frequency converter allows the pumping speed to be matched precisely to process demand.

Accessories/Technical options

  • Manual control unit for easy vacuum pump control
  • Parameter configuration kit for alteration of control settings by a computer, including software
  • Pressure transmitter for pressure-regulated vacuum pump operation
  • Inlet filter
소묘
MINK MV 0040 - 0080 D Synchro
MINK MV 0040 - 0080 D Synchro
Pumping Speed

Air at 20 °C. Tolerance: ± 10%

50 Hz
60 Hz
Pumping Speed
기술 데이터 MV 0040 D MV 0060 D MV 0080 D
펌프용량 40 m³/h 60 m3/h 80 m³/h
최대 진공도 40 hPa (mbar) 40 hPa (mbar) 40 hPa (mbar)
Power consumption (motor + fan) 1.3 kW 1.7 kW 2.1 kW
모터 정격 회전속도 1200 - 4200 min-1 1200 - 4200 min-1 1200 - 4800 min-1
사운드 레벨(ISO 2151) 62* dB(A) 68* dB(A) 71 dB(A)*
중량(근사치) 80 kg 85 kg 87 kg
치수(L x W x H) 585 x 345 x 370 mm 610 x 345 x 370 mm 610 x 345 x 370 mm
가스 유입구 / 배출구 G 1 ¼" / G ¾" G 1 ¼" / G ¾" G 1 ¼" / G ¾"
* average at ultimate pressure

다운로드

MINK MV 0040 - 0080 D
Synchro

고객께서 찾는 펌프 제품이 있으시나요?

Standard News

토픽 뉴스
  • 진공으로 제작되는 코로나 테스트 키트의 플라스틱 부분
    코로나는 아직 전 세계적으로 유행하고 있으며, 코로나 테스트는 생명을 구하고 감염자에게 즉각적으로 도움이 되는 수단입니다. German Robert Koch Institute에 따르면, 코로나가 시작된 이후 독일의 연구소에서 약 280만회의 테스트가 수행된 것으로 알려졌습니다. 코로나바이러스는 입, 코 또는 목에서 면봉으로 채취하여 진단됩니다. 민감한...
  • 신규 병원을 위한 빠른 공급
    당사의 대형 진공 펌프 중 12개는 중국의 우한(Wuhan)에 공급되어 코로나 바이러스(Corona virus)에 감염된 환자들의 치료를 지원합니다. 두 신규 병원이 며칠 전에 우한에 건설되었습니다.
  • 메이플 시럽 가공 및 메이플 시럽용품 제조업체, 2018년도 Busch Innovation in Vacuum Award 수상
    2018년도 Busch Innovation in Vacuum Award는 캐나다 업체인 Les Équipements Lapierre(Lapierre Equipment Inc.)가 수상했습니다. 이이 업체는 Busch의 건식 Mink 클로 진공 펌프를 채택해 메이플 시럽 가공 프로세스 효율성을 대폭 개선함으로써 메이플 시럽 직접 추출 방법에 혁신을...
  • Capron GmbH, 중앙집중식 진공 시스템으로 40% 에너지 절약 달성
    Busch의 중앙 진공 시스템은 CNC 가공 기계로 목공 작업 시 에너지 비용을 절감합니다. 독일에 본사를 두고 있는 선라이트(Sunlight) 브랜드 캠핑카 제조업체인 Capron GmbH의 사례입니다. 네스팅 테이블과 진공 블록 유닛을 사용하여 CNC 가공 센터에서 내부 설비를 생산합니다. 40% 에너지 절약 외에도 Capron은 유지보수 비용을...
  • 에너지 소비의 70%가 절감되는 진공 공급
    Feinkost Dittmann 육가공품 회사는 100년 이상 안티파스티와 육가공품 상품을 주로 취급해 왔습니다. 독일 타우누슈타인의 생산 현장에서는 유리 재질 및 플라스틱 트레이에 포장된 다양한 신선 제품을 생산합니다. 이곳은 Busch의 중앙 진공 시스템을 통해 포장 기계의 진공 공급을 진행한 지도 1년이 넘어갑니다 [2013년 12월 설치]....

Standard News

최신 뉴스