Proven technology, proven design –
decide for the best solution

COBRA DS 2610 / 3010 E

  • Advanced Screw Design
  • Efficient:
    low operating costs, minimal maintenance, high uptime
  • Flexible:
  • Short Process Times:
    due to high pumping speeds
  • Compact Design

COBRA DS 2610/3010 E are dry screw vacuum pumps in the proven COBRA DS series. Their high pumping speeds, even under conditions in which a high hydrogen throughput is required, make COBRA DS screw vacuum pumps ideal for all demanding processes in the production of photovoltaic cells, flat panels and semiconductors. State-of-the-art COBRA DS screw vacuum pump technology allows powder- and particle- laden media to be evacuated.

COBRA DS dry screw vacuum pumps feature dry compression, a specially developed screw profile, and unimpeded gas discharge. The result is a high degree of vapour and particle tolerance. The screws are manufactured from a single-piece casting avoiding any gaps, making the ingress of process fluids or particles impossible, and thereby preventing corrosion.

The COBRA DS 2610/3010 E feature an integrated vacuum booster as standard, providing higher pumping speeds and ultimate pressures. The backing pump and vacuum booster are combined on a compact base frame.

Equipped with high-efficiency motors, the COBRA DS 2610/3010 E offer excellent energy efficiency. With low maintenance requirements, low operating costs, a very high uptime and a long life cycle, the total cost-of-ownership is very low, setting the standard in this performance class.

Retrofitting these screw vacuum pumps to existing systems can be performed quickly and easily due to a fit-in-place design.


  • High-density plasma CVD (HDP-CVD)
  • Rapid thermal processing (RTP)
  • Sub-atmospheric CVD (SACVD)
  • Metal-organic CVD (MOCVD)
  • Plasma-enhanced CVD (PECVD)
  • Low-pressure CVD (LPCVD)
  • Atomic layer deposition (ALD)
  • High-capacity load lock

COBRA – the new generation of dry vacuum pumps for demanding processes.

Want to know more?
Contact us directly (Busch Germany):
+49 (0)7622 681-0 Get in contact

Technical specifications
COBRA DS 2610/3010 E are screw vacuum pumps combined with one vacuum booster. Two screw rotors inside the cylinder of the screw vacuum pump rotate in opposite directions. The pumped medium is trapped between the cylinder and screw chambers, compressed, and transported to the gas outlet. During the compression process the screw rotors do not come into contact with each other or the cylinder. Thus, no lubricants or operating fluids are required in the compression chamber. COBRA DS series vacuum pumps use efficient, indirect water cooling resulting in a controllable temperature distribution throughout the pump body, and allowing to respond to process variations. The advanced screw design allows an extremely high pumping speed for the discharge of hydrogen. The COBRA DS 2610/3010 E use high-performance vacuum boosters to optimize the system performance.

COBRA DS 2610/3010 E
COBRA DS 2610/3010 E
Pumping speed

Air at 20 °C. Tolerance: ± 10%

50 Hz 60 Hz
Pumping speed
Technical data COBRA DS 2610 E COBRA DS 3010 E
Nominal pumping speed m³/h 1900 3200
Nominal motor rating vacuum booster kW 50 Hz 5.5 15
Ultimate pressure hPa (mbar) 0.001 (1·10-3) 0.001 (1·10-3)
Nominal motor rating backing pump kW 15 15
Power consumption at ultimate pressure / Idle mode kW 50 Hz 11 11.8
Nominal motor speed backing pump min-1 3600 3600
Nominal motor speed vacuum booster min-1 3600 5400
Noise level (ISO 2151) dB(A) < 75 < 75
Water consumption l / min 13 13
Nitrogen consumption l / min 0 - 200 0 - 200
Weight approx. kg 1300 1380
Dimensions (L x W x H) mm 1436 x 722 x 1525 1436 x 722 x 1525
Gas inlet / outlet DN 160 / DN 63 DN 160 / DN 63


COBRA DS 2610 / 3010 E

Standard News

Latest News