Proven technology, proven design –
decide for the best solution

MINK MH – Reliable Hydrogen Recirculation Even Under Extreme Conditions

Carbon dioxide emissions will have to be further reduced in the coming decades. In order to achieve the target set by the EU and G8, emission-free mobility needs to be promoted. Fuel cells are an excellent solution for the green transport of the future.

Busch has developed the key solution for fuel cells: MINK MH – the first hydrogen-approved claw compressor worldwide.

It is specially developed for the recirculation of hydrogen in fuel cells. It is resistant to severe vibration levels and may be operated under extreme temperature conditions, between -30°C and +95°C.

All components are mounted in one unit. This "all-in-one" design leads to a very small footprint making the Mink MH the optimum solution for every fuel cell.

Its compression is contact-free and completely dry. This means that no operating fluids are present in the compression chamber. None of the internal moving parts of the compressor come in contact with each other. Components are not subject to wear and servicing tasks are eliminated completely.

An integrated variable speed drive allows the volume flow to be altered dynamically. This means, that the Mink MH always operates within the most efficient output range. The volume flow remains constant throughout the entire life cycle of Mink MH compressors.

The CAN communication system permits parameters such as rotational speed and power consumption to be permanently recorded and controlled.


Want to know more?
Contact us directly (Busch Estonia):
+ 372 568 13 203 Get in contact
Want to know more?
Contact us directly (Busch Estonia):
+ 372 568 13 203 Get in contact


  • Specially designed for fuel cells
  • Hydrogen-approved by SGS-TÜV
  • Vibration-resistant
  • Operation under extreme temperature conditions
  • Dry and contact-free operating principle
  • Maintenance-free
  • Variable speed drive
     

Mink MH is the ideal solution for the following sectors in which hydrogen recirculation plays an important role:


  • Transportation: automotive, rail, maritime, aviation
  • Stationary: electricity generation
     

In a fuel cell, a combination of hydrogen (coming from the tank) and oxygen (from the air) produces electricity, heat and water as a by-product.

A fuel cell consists of two electrodes, an anode and a cathode. A membrane separates them from each other and is responsible for the ion transport.



Hydrogen is supplied on the anode side, oxygen on the cathode side. The hydrogen molecules are split into protons and electrons.

The hydrogen protons diffuse through the membrane to the cathode, where they react with the oxygen to form water, thereby releasing energy.

It is important that oxygen does not diffuse into the hydrogen loop to prevent explosive conditions. Therefore, hydrogen is injected in a higher quantity. This excess hydrogen shall not be released to the atmosphere because of legal regulations and efficiency reasons.

The solution is to recirculate it back to the system inlet. For that purpose, our MINK MH claw compressor comes into operation. It has been specially developed for the recirculation of excess hydrogen in fuel cells and is hydrogen-approved by TÜV Saar.
 

Please accept marketing-cookies to watch this video.

Product Overview

Want to know more?
Contact us directly (Busch Estonia):
+ 372 568 13 203 Get in contact

You did not find a suitable product?

Standard News

Topic News
  • Secure Clamping of Small Panels with Vacuum
    ASSTEC Assembly Technology GmbH & Co. KG specializes in developing and creating ergonomic workspaces. Its range of products and services covers everything from the supply of individual components...
  • Modern Vacuum Technology Increases Energy Efficiency During Vulcanization
    ContiTech Antriebssysteme GmbH (ContiTech Power Transmission Group) was able to significantly increase the energy efficiency of its vulcanization systems by using the latest vacuum technology for...
  • Safe and Efficient Exhaust Gas Cleaning Using Modern Vacuum Technology
    Nouryon Akzo Nobel Industrial Chemicals GmbH produces, among other things, chlorinated hydrocarbons (CHC) in the city of Frankfurt-Höchst, Germany. The exhaust gases resulting from methane...
  • Energy-Efficient Vacuum Supply in the Production of Windshields
    At its state-of-the-art manufacturing plant in Leingarten, Germany, Fuyao Europe produces ready-to-install glass windows for the automobile industry from raw glass. To hold the windshields during...
  • Energy-Efficient Packaging of Pizza Toppings
    Pepperoni for topping pizzas is the core product of Danish Crown Toppings. A total of 15.0000 tons of this spicy pizza topping are produced every year. That's enough to top 300 million pizzas. The...

Standard News

Latest News